• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Ibeat 2007 Te250 Co Setting

H

huskylyth

Husqvarna
C Class
Hi All,
Thanks to the collective knowledge here, I’ve managed to make a sick Husky run.

Now I’m in the process of making it run better I’ve set the TPS as per the forum posts and the throttle stop, and it’s miles better.

I’m still feeling a “hole” at 1/4-1/2 throttle when decelerating down hill or transitioning between stations.
I thought I’d manually alter the CO settings, but it’s greyed out in iBeat.
I’m in maintenance mode, running a bung, so grabbed a new resistor just in case but no different.
Leaving the resistor out, iBeat triggers open circuit, so I know the resister is working, even if it doesn’t change maintenance mode to 0.

With the resistor unplugged I also can’t use the a use the feedback or adaptations either.

From reading here, that’s correct for a 2007 and the only thing that iBeat can do is TPS, and diagnostics.

Could someone more learned than I confirm this?
 
I belive that it is not a problem of the firmware for that year. I have an '08 te510 and a '12 txc310. CO greyed out on the 510 but not the 310.
 
You must log in or register to reply here.
Back
Top