• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

LED Tail Light Install Help

JSB Jeep

JSB Jeep

Husqvarna
B Class
Hi all,

I've tried the search feature but haven't found any kind of tutorial on an installation for an Edge-2 LED Tail Light Kit. My kit came in the mail today and I want to get going on the installation but I can't find any instructions. Any help would be much appreciated.

Thanks!!

2005 Husqvarna TE510
 
JSB Jeep;51894 said:
Hi all,

I've tried the search feature but haven't found any kind of tutorial on an installation for an Edge-2 LED Tail Light Kit. My kit came in the mail today and I want to get going on the installation but I can't find any instructions. Any help would be much appreciated.
Thanks!! 2005 Husqvarna TE510
Click to expand...

Hey JSB Jeep
I'm sure someone will give you some direction soon. But in the meam time... if you use the search button at the top an type in "Wiring LED tail light" you will get lots of threads to read up on.

here's two good ones to start with.

Reload this Page LED turnsig/tail light replacement woes.......

Brake light problem.

Good Luck :thumbsup:
 
I just installed mine a couple weeks ago, if you can wait till later this evening, I'll find the wiring chart I wrote down, it's not like it seems it should be, took a little playing around with different combinations.
 
I agree with Ruffus. The wires are backwards from what you think. I just used trial and error. If he doesn't find his, i'll unbolt my fender and write the wires down.
 
This is what I kept from a thread on installing a Baja Designs LED. This, I'm pretty sure is identical to the LED light that came in the powerup kits with the Arrow exhaust for 08's.

If using the rear light that came with the power up kit it goes like this,,,,or this is what you'll need to get it all wired up. On the connector on the bike the wires go like this.....the red with the black stripe is the + for the right turn signal..... there is no black wire.... the blue wire is the ground for all the lights including the turn signals.....the lite blue is the + for the left turn signal....the yellow wire is for the running lights....and the green wire is for the brake light....


Now for the light itself......the red wire is the brake light.....the black is the ground..... and the yellow is the running light..........this info is from an 08 TE450...
 
Okay, I checked mine

Husky black to Edge black
Husky yellow to Edge red
Husky blue to Edge yellow
 
Thanks everyone!!! This forum is loaded with some great people. I'm glad I chose a Husky.......
 
No I haven't done this yet. I have yet to find a detailed write up for this particular application so I'm hoping to have a guy at work (nicknamed McGuyver) help me out. I'm hoping to get it done within the next week and can post pictures then if that helps. I don't see why it wouldn't work for your 610.
 
You must log in or register to reply here.
Back
Top