• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

little tip for clutch levers and a question too !

R

rabskyline

Husqvarna
AA Class
my te510 clutch lever almost touches my bark buster and if dropped might brake it or jam it up ! so i was on look out for short one.. found out that the KTM migura 250/300 2 stroke lever is shorter by an inch and is exact same fitment.. so mine is now shorter ! bit harder to pull but means i can use 2 fingers for tight stuff easier and still not nip my fingers when i pull it in... and at 12 bucks, cheap as chips ! :cheers:

ps, anyone else 510 clutch quite heavy anyway ? mates 510 is lighter by a fair bit... ive bled mine and made no difference..
 
Another trick is to grind back some (most) of the end ball on the lever this will help it accommodate the bark buster bar (they can bend in on the levers a bit after a put down.
 
You must log in or register to reply here.
Back
Top