• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Removing the tank on an 08 with a Motosportz damper...

Motosportz

Motosportz

CH Sponsor
Staff member
I get this question a lot so this weekend when i took my tank off to check the valves I snapped some shots. It's EZ and no need to take off the triple etc...

2 bolts and pop the damper out (leave the pin attached)...

343987188_k2jtM-L.jpg


343987191_RzuSP-L.jpg


Take the tank bolt off...

343987197_7oRS4-L.jpg


Loosen the frame clamp pinch bolt. On my bike i can do it without removing the plate, you might have to remove it...

343987210_6n5ff-L.jpg


Swing the damper clamp to the side...

343987225_TNHPA-L.jpg


Remove the tank / side plate bolts and pull the tank off...

343987236_DyAWi-L.jpg


343987242_7oJjw-L.jpg


Reverse to install.

EZ
 
You must log in or register to reply here.
Back
Top