• Husqvarna Motorcycles Made In Sweden - About 1988 and older

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Seat 71 Enduro

danlboon76

danlboon76

Husqvarna
AA Class
Can anyone say for certain that there is a difference between the Cross and Enduro 360 seat in 1971? I purchased a seat cover for a 68-74 model but it turned out to not be wide enough, nor did the stitching match up. I don’t want to bad mouth any company so did I just get a bad cover maybe? Thoughts?
 
Part numbers for the Cross and Enduro are the same. Is the foam original or new?

Give the company you purchased the seat cover from a chance to make it right. If not - do definitely share the name. It will help out all of us in the vintage Husky community the inconvenience of going through the same situation of purchasing a substandard part that doesn't fit or work as intended.
 
Unfortunately I’m guilty of buying the seat cover two years ago then having to shelve the project due to life’s curveballs without opening up the cover at the time. That’s on me I feel, but should the company still decide to work with me on it I will definitely pass that on. It’s a bit difficult getting a bike together when it’s been in a box disassembled since the early 90’s and the only model like it I’ve seen is in a museum in Sweden.8A2BB82A-4B8A-41A1-80E2-6E683FA40327.jpeg
 
I purchased a seat cover for a 68-74 model
Click to expand...
68 - 73 seat foam is shorter than a 74 so theres no such thing as a 68 - 74 seat cover. Seat foam and cover length increased about an inch in late 73 early 74 depending on the model. All the pans are the same, all foam widths are the same. I think the foam height increased about a 1/2 inch over the years but it hasn't been a concern with restorers.

The Vintage Husky web page for seat components is a good reference. It shows what seats came with what years. http://vintagehusky.com/parts2.htm

In my experience seat covers will stretch as much as an inch with a little heat and foam can be trimmed to any dimension with a sharp (non-serrated) kitchen knife.
 
Thanks Crash. I ended up purchasing from another supplier with much better results. Of course I far exceeded the time allowed on the return policy for the other one. Oh well, lesson learned.
 
If nothing else you could sell it to someone needing a seat cover for a 1974 model. Seeing it is a 68-74 seat, it likely only truly fits the 1974.
 
You must log in or register to reply here.
Back
Top