• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

stalling issue

:rant:There have been so many threads of this nature that I seemed to have over looked this one. This is the first time I've seen a dealer chime in and say there was a problem and that there was a fix. It would be nice if there was a little more info on this issue, because it is a problem and a nasty black eye for the TE's.

I've gone form winning most of my races to being lucky to even finish, since switching to Husqvarna.

This really piss' me off that I have wasted so much time and money on this problem and now a dealer finally admits there is a problem and a fix.

How many freak'n threads about this subject does it take to finally get somewhere with this problem. :banghead:

fitness2go- let us know if you do this "top secret" mod and if it works for you.

BTW- Thank you Husqvarna for ruining my '08 racing season. :mad:
 
Seems to me what was said is there could be a small issue with some like in very few. The FI on the Huskys is very good. With bike properly broken in and set up have not seen any FI problems. Way better than what is comming on some of the J models. As with every MC of today there could be some minor glitches you might have one? who knows. What's your Dlr say? Obviously the Power Commander hasn't fixed it. If you can't fix it Dlr should be able to if not find one that can. It's that simple Later George
 
The Power commander has allowed me to tune it to where it runs good, but it still stalls a lot. I think it's the fuel pressure sensor that's causing the stalling. It just shuts off. It even does it sometimes just idling. It doesn't seem to die like a carb bike dies, it just seems like it's shutting itself off.

As far as being better than the "J models", it has the same fuel injector as a Suzuki Quad. We didn't even get the race stuff, we got the stuff they are using on the big fat quads.

"What's your Dealer say"? He says drive 250 miles and drop it off and they'll look at it. Then I can come back and get it in a week or so. It shouldn't cost too much. But, why would I want to leave it with somebody that thinks it's got a Keihin throttle body?

I just need somebody to tell me what this mod is, so I can do it. I have a better shop here than most dealers. I know because I've done work for dealers.
 
Is that the reason Suzuki had to stop selling them and send back to J land not the Quads but the MX bikes last year?
If you have it figured out get the fuel pressure sensor and change it out your self. If you do let us know as their is no such part in this system. Later George
 
My bike is experiencing exactly what Motorhead's bike is doing...cutting out over the gnarly stuff when you chop the throttle and get back on it to launch over a log, root ball or boulder. It also happens to just cut off when the bike is running a little hotter than normal with steady throttle followed by a mini release of said throttle. I can't tell you how many times I have killed the bike when the going gets tough. The worst situation happened when I came up to a medium sized log, chopped the throttle and immediately followed that up with a blip of the throttle only to have my bike die right as I was mid-way over the log almost sending me over the bars! From what I have heard...450 MX bikes have a tendency to cough and die. I really think this is their nature and the fact that I have the Rekluse exacerbates the situation!

George, I have had my dealer play with my bike using the iBeat software, which is totally lame and not very useful (I heard that they should be releasing a new version with almost complete control of the EFI). I will let everyone know how my bike responds to a custom DYNO'd map with the accelerator pump activated via Power Commander! Correct me if I'm wrong, but Motorhead has been playing with his PC III without hooking it up to a dyno. I really hope this "investment" cleans everything up****************************************! FYI...I just got the Power Commander in the mail and it's going to JD Jetting next week.

David
 
Why didn't you say something in Baja would have hooked up my computer and fixed it. Takes about 5 min. Later George
 
Up-tite;23334 said:
If you have it figured out get the fuel pressure sensor and change it out your self. If you do let us know as their is no such part in this system. Later George
Click to expand...

You're right, there is not a replacement part in the system, but according to the wiring diagram there is one in the throttle body.

So you're saying this problem can be fixed by hooking it up to a iBeat?


BTW- You're right fitness, I haven't had a dyno, just using seat of the pants and my right wrist to tune it.
 
I'm just going to have to buy a lap top. I think if I have a lap top I could get this thing running right. I need to set the TPS open and closed points in the PCIII and then do some "live" tuning.

I don't think there's anything that can be done to the fuel map with an iBeat that I can't do with the PCIII.
 
Up-tite;23363 said:
Why didn't you say something in Baja would have hooked up my computer and fixed it. Takes about 5 min. Later George
Click to expand...
Is the TPS is what is causing the stalling issue. My 08 TE450 does the same thing. Hit the throttle,let off real quick,then get back into the throttle and it coughs and dies. Doesn't matter how fast or slow you get back into the throttle either. You don't have to tell me what to do,,just wondered if it is related to the TPS. That way when I take it back over to Harvey to get it retuned he'll have a good place to start to fix the problem. Thanks George.
 
Re mapp

whent for spin the other night and she seems to run lot sweeter low down rev range,and didnt stall but havnt tried any really snotty stuf will keep you informed.
 
scoobywrx05;24131 said:
Is the TPS is what is causing the stalling issue. My 08 TE450 does the same thing. Hit the throttle,let off real quick,then get back into the throttle and it coughs and dies. Doesn't matter how fast or slow you get back into the throttle either. You don't have to tell me what to do,,just wondered if it is related to the TPS. That way when I take it back over to Harvey to get it retuned he'll have a good place to start to fix the problem. Thanks George.
Click to expand...

Have Harvey call me when you do. Later George
 
So is everyone experiencing stalling issues has checked their fuel pump? There is a known issue on the 08 450's 510's and 610's where the fuel pump pickup slides in the housing causing fuel starvation which leads to stalls, et al. I thought I'd mention this as the factory is working on a solution for the 09 pumps. Might not be a FI prob but a fuel pump prob...

Pumpinfo.jpg
 
I was thinking about doing the snack attack MOD!

What does increasing or decreasing the Pressure Regulator do? That's way over my head, but I thought I would ask?

Also, how can you tell if the fuel pump pickup has slid into the housing?
 
It's pretty obvious when you look at it, but like where the black part of the pump meets the silver part the body steps down. There are two fingers that go over this step. ( look right under the yellow line in the picture pointing to the "high pressure pump" ) If the fingers are not over this step, then the pump has raised. It's notched so it only fits all the way down when it's lined up. The zip ties want to slide up and the fingers spring open, allowing the pump to slide up.
 
You must log in or register to reply here.
Back
Top