• Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

TE to SM caliper relocation/rotor

G

gimpy

Husqvarna
Greetings all. I have been the proud owner of an 07 TE610 for about a half year now. I picked up a set of factory SM450 wheels that were missing the rotors. The fit to the bike is perfect, I got a factory rear TE610 rotor that works fine with the SM 450 rear wheel, my question is the front. I purchased a SM kit from EBC for the caliper relocation bracket and rotor, but it won't work, the bracket is not even close to what i need.
What caliper reloction bracket have you all found works for this application? The rotor hub is about a MM or two larger than the hub of the bike, so the bolts will be doing all of the work, so I suppose the rotor I got from EBC is not correct either. The kit I got from EBC is a SM6184LD
Thanks for your help
 
You must log in or register to reply here.
Back
Top