TE449/511 Wheel Fitment

[bhuizer]

I'm going to be searching for an extra set of factory wheels for my '13 TE449. Do all of the 2011-2014 Husqvarnas run the same Excel wheels, axles, etc? Did a quick search and did not see any direct info on it.

Thanks for the help!

 

[Normann]

Same.

 

[Huskynoobee]

2011 uses Saxxes rims. But hubs/dimensions same same.

 

[bhuizer]

Thanks for the info. Just to verify, do all of the 125cc, 250cc, 300cc, and 310cc bikes run the same wheels/axles as the 449/511's from 2011-2014 as well?

 

[Normann]

2011 uses Saxxes rims. But hubs/dimensions same same.

I have black 2011 rims of Excel Takasago, 2012...2013 are same, but silver.
http://www.excel-rim.com/products/RIM_application_for_OE_replace-20141226.pdf

 

[Motosportz]

All 4 stroke wheels for many years should fit.

 

[rancher1]

Thanks for the info. Just to verify, do all of the 125cc, 250cc, 300cc, and 310cc bikes run the same wheels/axles as the 449/511's from 2011-2014 as well?

The 125, 250, 300 have a different hub that is a different width so you would have chain alignment issues with the 2 stroke wheels.

 

[R_Little]

i think the late model 2009 on 125 rear wheel will fit a 4 stroke.

 

[rancher1]

i think the late model 2009 on 125 rear wheel will fit a 4 stroke.

This is true in 2009 the 125s went to the 4 stroke wheel with the new frame.

 

[R. Stephen]

All 449/511 wheels have the rear rotor spaced out more (5mm) over the older 450/510 wheels. not a big deal. Also the 2 stroke wheels are narrower than the 450/510 wheels on the sprocket side by about the same about 5mm or so. If you know what you are doing they can all interchange. All the fronts are a direct swap just use the spacers and axle that came with your bike. There are a few different front axle offsets between years. I have bikes from all the families and I swap wheels all the time. One thing to remember is the rear on a two stroke spins the opposite way as a 4 stroke if you swap a lot.

 

[Andrew brindley]

Hey guys, new to forums. Trying to find out if a rear 5.5x17 will fit upto my smr511, I'm aware it's a big wheel with big rubber. Can't seem to get a yes or no out of anyone. Any help would be awesome.

 

[teuchter]

I run a 5" rexfelgen with 150 street rubber. A 160 slick will fit because the wall profile is slightly different. I reckon the 5.5" would fit but would be kind of pointless because that seems too wide a rim for 150/160 rubber. You won't get anything bigger than 150 street/ 160 slick on there owing to chain clearance.