• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

TE510 can you measure your rear spindle/axle 2006

W

weeksy

Husqvarna
B Class
Please.

Hopefully looking at 270mm :)

IF anyone has one out of the bike can you check please, i'm not in front of mine till next week.

thanks.
 
measured inside of axle block to threaded end is 257mm
outside of block is 268mm


diameter is 25 mm
 
p.s. if you have a front spindle handy for a TE510 can you measure the distance from end to the step down please ? Save me taking mine apart again... it's about 3-5mm different to the SMR spindle i have here and need my mate to make me up a spacer to increase the length of the bit pre-step down.

:)
 
You must log in or register to reply here.
Back
Top