• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

What sockets/wrenches do you carry?

Guoseph

Guoseph

Husqvarna
AA Class
For trail-side repairs, not your home tool box.

Mostly interested in what size of fasteners are on an 08 TE250 (I assume 310, 450, and 510 are similar) to carry the correct set of tools. I have only gone through parts of the bike and 8/10/12mm bolts seem to be the most commonly used.

A few specific questions:

Do you carry any sockets/wrenches larger than 14mm and what is it used for?
What size spark plug socket do I need?
Is there any need for odd size sockets/wrenches : 9mm, 11mm, 13mm?
Any thing you might need two of because the bolt and nut are the same size?
Any weird or bike specific tools (other than the 12mm allen front axle) that's needed?

Thanks,

Alex
 
8, 9, 10, 11,12 end wrench and 1/4" sockets
1/4" driver and 3" extension
1/4" bit socket
15, 27 axle wrench
(I have Motorsportz front axle nut)
hex 2, 2.5, 3, 4, 5, 6 bits
screw driver
phillips driver
pliers
crescent wrench
spark plug wrench
chain press
tire irons 3
 
What do you use the 9mm and 11mm for?

Is the Motosportz front axle nut 15mm?

Any idea what size spark plug wrench I need?

Thanks,

Alex
 
Should have edited 9 out. Is wrench for other bikes. I also have 15,17,19 wrenches for kids bikes axles. The 11 is same as 7/16" and is needed for Motorsportz steering stabilizer.
 
Mousse tubes in front and rear safes me some spanners to remove wheels.
No air pump or tubes .. no levers.
I got one 280mm long Multigrip
little socket and bit set up to 13mm with allen up to 6mm.
8mm dep socket driver
one flat screwdriver .
Some m6/m8/m10 bolts and nyloc nuts.
5 fuses and 1m wire.
some liquid metal to fix holes in crankhousings.

thats about it.
 
I dont my bikes super reliable****************************************
Joking a venhill tool bag with an adjustable spanner patches n co2 inflator. And a soark plug justincase 2pop you see.
 
You must log in or register to reply here.
Back
Top