• Husqvarna Motorcycles Made In Sweden - About 1988 and older

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Wheel spacer on '77CR250?

The ebay link takes me to a rear wheel spacer for a 1970 360 Sportsman.
I run the 77/78 black leg forks, and there is no spacer other than one that would be used to replace the speedo drive.
 
Just looked ......... it is the internal part of the speedo drive, so yes, the one pictured in your hand looks like the one in the right side that usually has the peg drive stuck to it.
 
The link does take you to a listing for a rear spacer, but the part no. is the same as what is listed in the fiche. The ebay spacer appears narrower, which seems to be what I need. But if the one in my hand looks like the one that is supposed to be there, then I'm back to square one. Can anyone tell me how much axle cap overhang they have on the black 77/78 forks, or are the nut bottoms tight up against the forks?
 
The link does take you to a listing for a rear spacer, but the part no. is the same as what is listed in the fiche. The ebay spacer appears narrower, which seems to be what I need. But if the one in my hand looks like the one that is supposed to be there, then I'm back to square one. Can anyone tell me how much axle cap overhang they have on the black 77/78 forks, or are the nut bottoms tight up against the forks?

Here's a couple pics of my 78 CR250 if you need any more pics let me know.
 

Attachments

  • IMG_0720.JPG
    IMG_0720.JPG
    141.6 KB · Views: 19
  • IMG_0721.JPG
    IMG_0721.JPG
    136.2 KB · Views: 21
Back
Top