• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Who needs that sinkiung starter!

need2boat

need2boat

Husqvarna
AA Class
So I'm waiting on a new Sprang as the starters still hanging from time to time. I know many a person has removed the starters from the TXC/TE 250-310. So my question is:

What about the needle bearing (42) the starter pinion (32) rides in. The bearing is pressed into the left side case and I'm concerned without something in the center the bearings might work themselves loose and cause issues. I do plan to put the starter back and this was just a stop gap so I could maybe race this weekend that said it's not worth blowing the motor over a needle baring.

SO others that have pulled the starter? did you pulls the needle bearing as well?

starter.jpg
 
You must log in or register to reply here.
Back
Top