• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

Wiring/Blinker/Lack of Power HELP!

RideLI631

RideLI631

Husqvarna
AA Class
So i had aftermarket blinkers on my 09 te510 till one snapped off. So i decided i was going to hook up my stock rear ones again. I have an auto tuner and a PC5. After i wired up my blinkers to the back and re-connected all the wires to and from the autotune and pc5 O2 sensor etc... (BTW does the auto tune draw power from the blinker wire because there is a wire going back to the taillight assembly coming from the autotune and im not sure why it is there). When i turn my key on the fuel pump primes and the bike will start and run. BUT i have no power to the screen on the bars the blinkers the headlight and the horn have nothing. I can't for the life of me figure out what is wrong with this thing. Any troubleshooting ideas or past experience in this subject greatly appreciated.
 
Ok installed a new fuse. Now i have power again but my blinkers will now not blink. When i hit the switch the left or right blinkers just stay on and don't flash. Anyone know why it would be doing this?
 
when my blinkers do that it's because something is wet and they have always worked the next day
 
If the signal lights but does not blink - the problem is in the "flasher relay" module itself. (flat black rubbery part located by the subframe with a 2 wire connector)

I replaced mine with a standard automotive unit and made an adapter by removing the pins from the original flasher module.

MAT
 
You must log in or register to reply here.
Back
Top