1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

All 2st 04 WR Restoration

Discussion in '2 Stroke' started by Xcuvator, Apr 10, 2012.

Page 2 of 2

  1. Clete Husqvarna
    AA Class

    Location:
    Tigard, OR
    Husqvarna Motorcycle:
    '01 CR/WR 250, '13 650 Terra
    Other Motorcycles:
    '06 Suzuki SV650 (gone)
    Will they fit an '02?
    Clete, Apr 14, 2012
    #21

  2. BILLF CH Sponsor

    Location:
    BMP Husqvarna, Salem, OR USA
    Husqvarna Motorcycle:
    92WXC350 /Lamson CR250/701 Vitpilen/
    Other Motorcycles:
    Triumph900 Scrambler 1200 HD Nightst
    Great job Steve ! nice front fender stickys!!
    BILLF, Apr 17, 2012
    #22

  3. Xcuvator Husqvarna
    Pro Class

    Location:
    Scholls Oregon
    Husqvarna Motorcycle:
    TE450,610 WB165,WR250 WR360 & XC430
    Other Motorcycles:
    yes
    Thanks, I used Pioneer Metal Finishing. Make sure you get hard anodizing. It is harder and much thicker. Their minimum for hard coating is 80$, but I can get four wheels and some other misc. stuff for the minimum. Usually I can get more stuff done than what I have ready.
    I had Decal Works rejuvinate some old patterns, for the custom stickers. They are very helpful there and the stickers are a high quality.
    Xcuvator, Apr 17, 2012
    #23

  4. haulin husky7 Husqvarna
    AA Class

    Location:
    SWVA
    Husqvarna Motorcycle:
    13 txc310, 2000 wr360
    Other Motorcycles:
    2016 TM 300en, 93 KLX650R, 1975 XR75
    +1 on decal works
    Sweet looking bike!!!
    By the way, does the 04 250's not have the true wide ratio tranny?
    haulin husky7, Apr 17, 2012
    #24

  5. Clete Husqvarna
    AA Class

    Location:
    Tigard, OR
    Husqvarna Motorcycle:
    '01 CR/WR 250, '13 650 Terra
    Other Motorcycles:
    '06 Suzuki SV650 (gone)
    Cool, thanks. I just checked their site out. Looks like one stop shop, and close to home. Good heads up on the hard anodizing. Thanks again.
    Clete, Apr 18, 2012
    #25

  6. Xcuvator Husqvarna
    Pro Class

    Location:
    Scholls Oregon
    Husqvarna Motorcycle:
    TE450,610 WB165,WR250 WR360 & XC430
    Other Motorcycles:
    yes
    Thank you, the WR trans went away somewhere around 2000
    Xcuvator, Apr 18, 2012
    #26

  7. oregonsage 4st Clerk

    Location:
    Dry Washington
    Husqvarna Motorcycle:
    FX450
    Other Motorcycles:
    Yamaha DT400 x 2, BMW G310R

    I would point out that the reverse would be my plan. Use the earlier rear fender and eliminate the 'ducktail' sticking up to trip you every time you mount and dismount:banghead:
    oregonsage, Sep 3, 2013
    #27
Page 2 of 2