TE/TC 17 TE 150

Always styln'

Me too.

Im lovin that first polished & red engine. Bright colors are tough on an engine in my opinion. Less is more!

I'm thinking!

Actually gonna have a heat wave. -14 out at farm at three in morning Monday.

Now we heading to thirty's.

Here's a pair of shoes to go with your outfit when you walk around the paddock. Now if only you could put a husky logo on them.

https://sport.woot.com/offers/adidas-outdoor-mens-terrex-trailmaker-1?ref=w_cnt_lnd_cat_sprt_1_28

Yeah! They prob be a big hit.

My work boots usually look those colors in spring.

No kiddin!

These are usually what my work boots look like.

Except for the laces. I have bunch of knots in my laces from the chain and front sprocket cutting it.

Mrs always says I smell like gas and oil. Shall I say my shop.

If they get too bad!

I resort to zip ties till get to farm store.

On the 7th day of Christmas, my Gun Kote came to me!

Some satin yellow,

Some stainless steel,

Some satin black,

Some satin blue,

Some satin white,

Some anodized blue,

And some hiiiiiigggggghhhhhh teeeeemmmmmpppppp masking tape!


Hopefully, have some nice covers coming out of the oven Saturday.

Kinda like makin and bakin cut out Christmas cookies.

Directions say, only way to remove it..... Must be mechanical means....

Didn't say anything about a motocross boots, so alright! We are good!

I've used this before. It wears good and only way to get it all off, is to sand blast, sand or wire wheel off.

Now, they got all fancy colors!

Took cover in one time to get stripped for anodizing. He showed me a small casting mark. He said no can do cause it will turn gray. I said then what heck did they put on here? He said that Gun Kote like stuff.

Merry christmas boys! Praying the ground hog sees no shadow this year

Merry Christmas!

Here are my first batch parts out of blast cabinet.

Now I will clean them again and they go back in to be blasted, switching over to glass beads.

Focus today is to get the covers done with the art work.

Woops baking them first after cleaning to see if any oil comes out of the pores.

Then beed blast

Final beed blast now soak in Acetone.

Nice! Merry Christmas to you and yours. I'm at BWW watching the packers game with my 2 kids atm. I got up early to get some wiring done on my F150. Installing a new sound system. I can never leave well enough alone, I'm sure you can relate...haha

Well, lil behind cause my air brush stopped working.

Took the thing all apart. Cleaned it good and still no go.

Ran in to town and grabbed another one.

So I will commence on Monday.

Here is my ignition cover before going back into the oven for final bake

Came out awesome!

Think it looks sharp on bike!

Water pump cover going in oven

Cylinder head turned out good.