TE/TC 17 TE 150

Bike runs awesome now bottom to top. OBTW, the quick flick of the right wrist ensures I will be the first one to the wreck. Lack of talent sucks!

Walt,

Looks like my RK Tech head will ship out on Monday.

Thanx

That Golden Tyre looks half ways decent.

Ordered! Thanx for heads up Walt!

Gettin close!

Trying to figure out color of skid plate. White, yellow, gray or blue?

Brake lines think go yellow or blue?

Skid plate colors.......

Brake line colors .........

More with silencer and what carb looks like.....

Which one is this?

I say Blue lines & plate!

Sorry for mulitpost. Whats the model number on this? I need to pull my reeds off and give em a look. Although its probably not worth it, ill probably upgrade regardless.

V4R26

Mine went bad at around 16 hours.

I know guy and his warped at 10 hours.

When they warp they make bike kinda sputter till engine gets hot and you think it is jetting.

After bike gets hot they start sealing.

252N soft - Int

Roger on lines and plate.

Walt!

My RK Tech head came!

Spacey!

The top of the insert is slightly taller than the stock insert and the plug cap boot won't fit tight to the head. Get an o-ring and put in the slot above the boot and it will force it down and seal against the head again.

WHAT??

Troy, there is a lil boot that keeps mud out of the head and insert gap.

Good tip Walt!

This bike with the head, carb, exhaust port work and V4 reed block should light up like a Christmas tree.

Can't wait to see how it drags out now with sons FC 250.

Walt, my head should be the carbon copy of yours adjusted for VPT2 and 1,000 ft sea level.

Yes, they look identical

so is the hex of the plug down in a hole

No the boot fits on the plug below the hex and above the threads in a small groove... then when tightened the boots seals up to the head still leaving the hex exposed.

Not mine but googled it real quick for example. Would've taken pic of the three hundo but at work instead being out riding