1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

1980-85 brake, swingarm & wheel mounting parts

Discussion in 'Vintage/Left Kickers' started by ruwfo, Feb 13, 2011.

Page 2 of 2

  1. megagobby Husqvarna
    B Class

    Location:
    croydon, london ,uk
    thanks very much . please tell me what goes between the brake plate and swing arm ?
    megagobby, Feb 27, 2011
    #21

  2. megagobby Husqvarna
    B Class

    Location:
    croydon, london ,uk
    is the distance spacer on the first pic that you show on inside of plate ? as in my pic the bearings are inside the plate . is this correct ? just need to know what the distance spacer is . think i have one . and need to know what goes between the plate and swing arm please
    megagobby, Feb 27, 2011
    #22

  3. ruwfo Administrator

    Location:
    NJ
    Husqvarna Motorcycle:
    1980 390CR, 1982 430CR, 1984 400WR
    Other Motorcycles:
    1985 250XC, 2016 FJ-09
    ruwfo, Feb 27, 2011
    #23

  4. megagobby Husqvarna
    B Class

    Location:
    croydon, london ,uk
    thanks . do you know the external dia of the internal spacer bushing that goes through the needle barings ? thanks
    megagobby, Feb 28, 2011
    #24

  5. megagobby Husqvarna
    B Class

    Location:
    croydon, london ,uk
    i have measured the internal measurement of needle bearing. and its 20mm . is this correct ? where do these two parts belong please? thanks SAM_1070.JPG SAM_1070.JPG
    megagobby, Feb 28, 2011
    #25

  6. ruwfo Administrator

    Location:
    NJ
    Husqvarna Motorcycle:
    1980 390CR, 1982 430CR, 1984 400WR
    Other Motorcycles:
    1985 250XC, 2016 FJ-09
    I don't know the inner bearing ID as mine has the spacer in it & it doesn't seem to want to slide out.
    These peices look like there part of a bearing race & they look destroyed to boot.
    ruwfo, Mar 1, 2011
    #26

  7. ruwfo Administrator

    Location:
    NJ
    Husqvarna Motorcycle:
    1980 390CR, 1982 430CR, 1984 400WR
    Other Motorcycles:
    1985 250XC, 2016 FJ-09
    Here's the CR (1985) rear wheel/brake break down drawing, for your reference

    Attached Files:

    ruwfo, Mar 1, 2011
    #27

  8. megagobby Husqvarna
    B Class

    Location:
    croydon, london ,uk
    thanks very much . so your saying my brake plate is 1985 ? i need parts 29, 31,32 x2 , 35 .
    megagobby, Mar 1, 2011
    #28

  9. ruwfo Administrator

    Location:
    NJ
    Husqvarna Motorcycle:
    1980 390CR, 1982 430CR, 1984 400WR
    Other Motorcycles:
    1985 250XC, 2016 FJ-09
    Yes , that's what it looks like to me
    ruwfo, Mar 1, 2011
    #29

  10. megagobby Husqvarna
    B Class

    Location:
    croydon, london ,uk
    is this the distance spacer and x ring seal that goes on inside of plate ? and im not sure if the other spacer is correct? ( for oppisite side from brake plate ) as on parts diagram it show a spacer with a flange . please confirm . thanks very much
    megagobby, Mar 3, 2011
    #30

  11. megagobby Husqvarna
    B Class

    Location:
    croydon, london ,uk
    i cant seem to get attachment to come up on here for some reason . i have inboxed you
    megagobby, Mar 3, 2011
    #31

  12. ruwfo Administrator

    Location:
    NJ
    Husqvarna Motorcycle:
    1980 390CR, 1982 430CR, 1984 400WR
    Other Motorcycles:
    1985 250XC, 2016 FJ-09
    Here's some comparison pictures of the 1981-84 WR/XC brake hubs vs the 1985 twin shock only ones.
    1st picture is the early style & 2nd the 1985. Note how the 1985 one is slightly larger in diameter, though the brake shoes are
    the same size.

    Attached Files:

    ruwfo, Mar 7, 2011
    #32
Page 2 of 2