1981 430 CR Restoration Mod. Project Bike

I purchased the tank from John without ever seeing it (blind faith or stupidity your call)

I will post johns contact info. later.


Thanks Schim,
Just doing a piece by piece resto-mod.for now.

Maybe this summer i will completley strip dowm miss Husky for a full blown Schim/texas style makeover.

New paddle tire for miss Husky,3.5 X 17 rim with tubless sealed rim to be built by Woody`s wheel works next.

I had Larry@ Scat trak paddle up this 140/70-17 Michelin Anakee tire to my specs

Decompression valve and combustion cham.mod.

KUDOS TO JOE AT RACERS MACHINE IN ESCONDIDO FOR REMACHINING MY COMBUSTION CHAMBER TO MY SPECS. AND FOR ADDIND A BOSS TO THREAD IN THE T.P. ENGINEERING DECOMPRESSION VALVE.

JOE MADE UP A SPECIAL JIG TO HOLD THE HEAD AS MY LATHE IS TOO SMALL TO HANDLE IT.

PERFOMANCE TEST RESULTS TO COME LATER, MUCH LATER AS I HAVE TOO MUCH WORK LATLEY.

TO CONTACT JOE AT RACERS MACHINE CALL (760) 741-2673

Looks very well done. So, what are your specs (unless you'd have to kill me...)

Can I have mine done to your specs?

My next head spec. seminar will be in San Diego Ca.on june 4th 2010 at marine stadium.

last two entering with Patron silver get in free.

Currently have only 2 seats left @$50 better hurry.

firecrackerkid,It will cost you a brick of firecracters delivered by july 3rd

Hey husky T,

Pm me and i will give you my specs.

Measure your bore so i can give you the dia. to end the taper and do you know what your squish clearance via solder compression?

I had to take off .045 to get my squish at .045 which seems to be optimal.
How is you resto going?
I have been way too busy building my machine shop to do anything to my 430.
Cant wait for Oct. and cool weather to return.

One brick coming up!

PM me your address

Seriously, that is a clean looking setup. I think I might buy another head and send it to him. Which popoff did you use?
Thanks,
Geary

82 wr430

Firecrackerkid,
Any chance you still have 84 500 frame?
Wanted to PM you but am still a NEWBIE

Hey cracker my address or racers Machine?

Is my brick on the way as July 4th is fast approaching.

I will give everyone my specs when i finalize my testing.

I used T.P. Engineering decompression valve.

Looked at all of them and this one looks to be very high quality workmanship and materials.

Did you want me to send your brick to racers machine? I figured I would send them a head and some money. I could just send it to Yucca Valley but I don't have that much faith in the postal service. Now if you sent me something with just a Grand Coulee address the postmaster would know how to get it to me. Small town benefits.

When sand cast meets buffing wheel

hidez,
That tooooooo purty to use. First boot scratch and you'll be crying like a baby. Put it up on the mantle betore it gets f'd up. (Or trade me for my plastic one???)

I know it`s almost too nice,maybe i will have swain coatings do a black heat dispersing coating on it so it doesnt blind anybody.

Miss Husky gets a new work station

This is why you havent seen any progress on my 430 CR project.

Rear shocks get a make over

Springs are going to be powdercoated with a silver base coat and then a blue candy over that.

Should look really clean with the rustoleum gold metallic shock bodies with rustoleum clear laquer.

The nice part about this new Rustoleum paint is that you don`t have to use any primer,i just taped off the shock bodies and put them in my bead blaster.not a bad finish for a rattle.