250-500cc 1992 Husqvrna Wxe 250

I also tested the motoplat coil and it was good. I have 3 CDI boxes for the bike but it is missing the killswitch. Could i be not getting spark because the killswitch and headlight switch are missing and i dont know where they originally hooked up in the wiring harness. The wiring diagram for a 2002 model does not seem to match for the 1992 bike.

get the mag off and look behind, if it's old school type behind use the Motoplat testing procedure

I got the mag off and the stator is motoplat but its not encased in red plastic or epoxy is that normal? It is a 12v 110w i performed all of the tests on the stator and it tested good. When taking the stator off the bike i noticed a splice in the wiring behind the exhaust where someone did a really bad splicing job. Im hoping that was my issue. I got a new kill switch i need to wire in and got a used ignition cover for $30, i was very excited. Ill post some pictures later on of the stator. Mag says motoplat mini 4.

Is this the normal stator for husqvarnas?

Yes for 1992

Does anyone know what size and thread is the nut to hold the mag to the crank? The nut was missing when i got the bike. Or of anyone has one for sale id love to buy it.

Update i have a small spark now

8000 57887 is the part number if you want to search some dealers, preferably older dealers

https://www.halls-cycles.com/images/PDF/Husqvarna .PDFs/1990-1994/92_wxc-wxe-250-360.pdf
page 54

Ive called halls and several other places looking for the mag nut with no luck anywhere. Does anyone here know if a 1995 wr250 stator nut would fit a 1992? Im hesitant to buy it as im US and its being sold from AU so its $30 shipping for a $15 nut but if it fits ill buy it.

look at the parts fiche to see if it't the same number

What oils have you guys had the best luck running in these bikes for both the gearbox and for mixing?