2010 510smr Daily Rider

The Arrows are sweet How do you like the set up
did they come with a ecu

it's not mine. another rider from supermotojunkie. he said it reduce the heat alot and its way lighter and sounds better than the stocks. not forgetting it comes with race ecu

Hey friends, what are the signs and symptoms that the bike need to undergo valve clearance immediately?

If the valves clearance is too loose they will make noise
if they are too tight and not closing all the way you will
have hard to start issues

Valve clearance (with engine cold)
Intake .................................................. ........0.004 ÷ 0,006 in. ( 0,10 ÷ 0,15 mm)
Exhaust........................................... .............0.006 ÷ 0,008 in. ( 0,15 ÷ 0,20 mm)

Maybe these help

Thanks, that helps. So far i dont have any problems starting.
What kind of noises actually? coming from the engine area or the exhaust sound sounding different?

http://www.youtube.com/watch?v=Y7vuvUYrEk0
the beginning of the video that hears a suspicious sound, but there is nothing wrong, everything has been verified

Thanks, if that's your bike then I say it's super sweet

Yes that is my bike, i have new ideas in this winter...

Up date: new fuel pump
The new fuel pump from CA-Cyclewerks died,had to put the old pump
back in, I will see if there is any warranty on this pump or not

Oh my, is it resulting to overheating?

No just a failure
But i contacted CA Cyclewerks and they were right on it
Sent me out a new pump the same day no charge
and the owner Chris talked to me on the phone for a while
to find out what exactly went wrong They are working on perfecting this pump
This is good news for husky owners, They already upgraded the pump from
original now they are going through another upgrade, The company is trying to make the pump
the best it can be, I definitely will do business with this company again
If you need to replace your fuel pump go to CA Cyclewerks They will do you right.

Thanks for the info. I shall be making my order of the fuel pump next month even though my stock one is doing fine. Just in case...

Done my valve clearance. definitely better throttle response and smoother engine braking. Now to solve the problem of my super hot midpipe!

Sunday project : Cut three inches off stock cans

Nice overall view

Thank you
Mike-3 throw up some shots of your SMR so we can check it out.

I'll put a link to where you can look at pictures of bike

http://teho.kuvat.fi/kuvat/Videot/
above is link some videos

http://teho.kuvat.fi/kuvat/Husqvarna SM510R 2010/
Above is link for the pictures of my bike

Thats a great looking bike

Thanks Maybe I buy still another front and rear wheels (3.50-17/5.00-17) and the rear fork paint black, the back of the white and also a little more tuning engine