449/511 Breather hose mod

To heck with you guys and your witchcraft and talk of breathers and oil and good riding spots. Im goin to sleep. The Troegenator has defeated me once again.

I am serious about an invite tho..
Give me enuff notice and I'll have some homebrewed beer waitin.

http://www.youtube.com/watch?feature=player_detailpage&v=8hIKo9HMkFo

The Hammers are bad. 13/62 gearing would come in handy.

Your buddy needs CTS... Of course the Husky goes up like its asphalt...

This is part one. I had to bring a friend that use to work with "Shawn " it was his very first time on a bike , I give him credit for making it to " The Squid Filte " ... Fun video, a good test of CTS at the end. Notice the Husky nails it, then again I have mad it threw no problems on other bike, the CTS defiantly works better .


View: http://www.youtube.com/watch?v=hzAfimvkk8M&feature=youtube_gdata_player

I'm interested also. Guessing it will need to be welded to the bike? Happy to buy a case or two for anyone in sydney that can help me attach it.

Bolt on application.

I ship to Australia ! How many ? Straight bolt up yes, just need to modify filler cap , I will sent you a drill-tap free PP only please

Hey CH patrons ! Soon I will be starting a thread on how I built my own high flow breather / oil return system using parts from my local ( for US residents ) HomeDepo , RadioShack, PepBoys and local nut and bolt store . This thread is tooo big ! It I know there are a ton of do it yourselfers out there with some building skills who just need a couple tips to get motivated and save some money. Even if you are not looking to increase capacity my breather system will re-route thoughs blow by gases out of the airbox where they are breaking down your air filter oil and sending hot gases back into your intake where you want the air as close to outside temperature as possible. My design will transform your airbox into a cold air intake . It will make your bike run cooler when running flat out and catch any oil that gets up the breather and dump it back to your engine . Sound good ?

Is that plastic?

It is

It's a project box from radio shack

I can get them in aluminum alloy too, want to see if ABS holds up first .

http://www.parts-express.com/pe/showdetl.cfm?partnumber=320-752

I like that last hill on part 1 of your videos. I went up something just like that at Gorman, except it was silt. When I stopped in it, you couldn't see my tire, only spokes. I remember thinking to myself how could anyone go up this? And I had my 511 pinned to go up to the top. It was the over pass from the mountain to go to the water tanks and the Grand Prix track. Later on some of the KTM guys were laughing at me because they actually race that section, but they go down it, not up it! I shrugged, only a Husky would attempt that. lol