A day in the life of: www.hva-factory.com

Nice. Where can you buy a mat like that?

you can buy those mats at your local Husqvarna lawn and forestry equipment dealership.

I got mine from Rocky Mountain ATV/MC in Utah... price has gone up but look like they still have them. Shipping within the US was free... got them next day.

https://www.rockymountainatvmc.com/parts/husqvarna-pit-mat-p

Hi everybody!!!

Just to let you all know that we are working on a fantastic new www.hva-factory.com website that will look and feel similar to our current site, but ultimately be a better user experience - particularly on the new crop of mobile devices! (whatever that means)....

Our current site is over 10 years old now, so is well overdue for an upgrade that I hope will be ready by the Autumn.

Now I am sure some of you are a bit like me and resistant to change - so we wont mess with it too much,

Andy.

Andy,

Here is a much needed item, to be reproduced.

Kick start knuckle for 78,79,80 primary kick era engine that goes on 125,250,390's.

Known for the splines to strip in the kicker knuckle, because kicker shaft clamp bolt, hits the recessed area in kicker shaft, while trying to thread bolt in.

This issue causes bolt threads to strip or not get the clamp tight enough. I've had to put the shafts in a lathe to cut recessed area deeper.

Hi Guys ! Just to let you know that our new site will probably go live tomorrow some time!!!

Also, If you go on Youtube and type in HVA Factory, we are doing some short videos you may like

I'm sure someone more 'techy' can add the links....

Andy.

[COLOR=var(--ytd-video-primary-info-renderer-title-color, var(--yt-spec-text-primary))]YouTube:[/COLOR]

[COLOR=var(--ytd-video-primary-info-renderer-title-color, var(--yt-spec-text-primary))] https://www.youtube.com/watch?v=DxgLpRHvzww[/COLOR]


[COLOR=var(--ytd-video-primary-info-renderer-title-color, var(--yt-spec-text-primary))]
View: https://www.youtube.com/watch?v=DxgLpRHvzww
[/COLOR]

very well done

Many thanks!

There are a few more videos on YouTube now - fee free to upload the links to those


Andy

These are great Andy, I've been sharing these with others! Look forward to more

Thanks everyone. Orders are coming in thick and fast on the new webshop. I am aware we had a few small technical issues (like some people not being able to login!), but I think they are sorted now....

Andy

View: https://www.youtube.com/watch?v=o18P5ljooeg

View: https://www.youtube.com/watch?v=W33jx10j9a4

View: https://www.youtube.com/watch?v=N31prdOPYFA

Please let me know if you are having trouble either finding the new hva factory website or if you can't login!?

Orders are coming in thick and fast, but some people have had a few issues...

Thanks,

Andy.

https://youtu.be/VIBi9HCmAbc

well said, my brother has done that shimming for years, makes the clutch disengage smoother if the stroke is actually pressing the pressure plate and not moving the whole clutch, also good to check for shaft play, if any your best bet is pull it down and find out why
thanks Andy for great videos on the bikes we love and like to improve

New Billet CNC'd Kickers are coming !

Andy.

that is some nice work