A day in the life of: www.hva-factory.com

holy crap a two piece ti brake rod nut that over the top A.E. NOW WHERE ARE THE EVO FOOT PEGS

Two piece ???

are the pieces available at the online shop?

looks like it to me looks like the end against the brake stays put makes since to me think about it and look real close i could be wrong Andy dose it spin in the middle?

Looks to me like they are just "waisted" at the end. Nice work Andy.

Yes - of course they rotate around the bushings in the middle.

Andy

so it is made from two pieces WTH now im having a brain fart im thinking what i was thinking wont work man its early here mite need coffee ??? doz it pivot or swivel in the middle looks like could i think it should that wood be way freakin trick maybe ill just go back to bed oh BTW any plans for those pegs

Andy !
After paint powder
époxy !

Thought you might like this. Rob Poulton and myself with Darth Vader the prototype trials bike and Billy Grossi's 82 bike...

well the what little of the bikes we can see looks good i wonder if they have cool HVA foot pegs

Is your new rear backing plate set up with the wider brake show width post. I find much better better braking just with that 5mm added
width. The post had to changed for 81 to 82 it was hard to do.

What is the metal grade same as side cases you make ?

Yes, made from top grade Aluminium rather than the Magnesium of old.

We will cover both of the types - thanks for the info, as I was trying to work out what years had what setup...

Andy

Some old pistons are getting hard to find and expensive, is that something hva could produce ?

Dave

Sorry mate - but we won't be making pistons! The list of things that are harder to find is plenty long enough to keep me going until I retire!!!

It is more a case of what to make next....

Andy

dying is not allowed we need foot pegs and maybe a few pistons hells bells your making cranks piston can be to big a deal i knew a guy who machined antique BMW car pistons by hand from billet he was the husky BMW bultaco dealer here

im thinking pistons would be tough to make but theres plenty of stuff to keep andy busy for us..wossner has the primary kick swedes covered

yea pistons aren't that biga deal didnt i read that WB 165 slugs are made to order wossners

Here is the 30mm brake shoe version of the CR Brake plate:

Andy

Just to let you know that we have Fork Springs for the 40mm 82-84 and Evo Husky forks in stock now. Also, I have listed the Black 83 2t side panels...


Andy