FE/FC Another 4cs option KYB SSS conversion

A friend of mine is running the Italian 2014' tc250 kyb's on his 15' Beta and loves them, length unknown.

BOWSER
My previous post refers...
I need help identifying these 4CS to SSS adaptor parts , PLEASE.
I assume the big on which is threaded is the bottoming cone and that the SSSrebound nut screws into it ?
Please help me guess where the smaller part goes...
This kit is from tbt racing and came with no ibstructions.
Any help appreciated

Gary

not sure on those parts, they are very similar to the ones I designed and made initially, I don't like how the oring seals on the side, you get a better seal having it on the bottom so the oring gets clamped the tighter you do the adaptors up, this also prevents the adaptors turning when undoing them - if they turn you can spend a long time trying to get them apart as I found out.....
the long bit is the bottoming cup and the little bit with the pink oring should go in from the outside of the fork and be clamped in when you do up the SSS rebound adjuster. I'm hoping their bottoming cups have a small hole in them near the base otherwise they will be slow on rebound from bottoming situation. Mine had a 1.2mm hole for this. If they designed them right you should also be able to use your existing 4cs springs.

There should be some pics floating around here of the ones I made.

how much are they selling those for?

Bowser
About 325USD if I am remembering correctly.
Thank you for your advice.
Gary

Hi Gary, the parts you have were designed and machined by me. I run the TBT racing Arizona in the US. The parts you received didn't come with instructions or any other parts because they really were not intended to be sold. It was a mistake by my counterpart to sell those. if you have any questions about them, feel free to pm me. Those parts were to be installed by TBT racing only. Sorry for the mix up.

Here's a place that does the SSS conversion.

https://www.facebook.com/pages/ProTune-Suspension/1379946175638335

Thanks JDUB
Your adaptor kit works beautifully , and I can fully recommend it. TBT RACING !
I could not be happier !
Gary

Is this for closed chamber like my 2016 te300? It can be done for it? Thats a way better price