1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc Another Lectron question - cable routing

Discussion in '2 Stroke' started by Myles Walshe, Aug 5, 2013.

Page 2 of 2

  1. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many

    Absolutely. Most carbs run the hoses over the top and I did that on the Lectron all along.
    Motosportz, Aug 7, 2013
    #21

  2. 454x Husqvarna
    Pro Class

    Location:
    Dunnigan,Ca.
    Husqvarna Motorcycle:
    2012 CR165 w/36mm lectron.
    Other Motorcycles:
    2014 BETA 300RR w/36mm lectron.
    MaxPower RPM's 167 kit.http://www.maxrpms.com/yz167-big-borestroker/ Come on Doug do it.....
    454x, Aug 8, 2013
    #22

  3. Rick Husqvarna
    AA Class

    Location:
    Lodi, Ca
    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    99 GasGas EC 200 , 05 YZ 125
    FYI......If you have that tiny 76mm 38TMXX good luck trying to shoehorn that 97mm carb in that small area. I ordered a Lectron to replace my 38TMXX back in Feb, mine would not fit, the shock and airboot are way to tight. This was on my 05 YZ125. Went with R.B mod instead...

    Thanks
    Rick, Aug 8, 2013
    #23

  4. Rick Husqvarna
    AA Class

    Location:
    Lodi, Ca
    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    99 GasGas EC 200 , 05 YZ 125
    Well...that sucks...I mean great....for those looing to replace the TMXX on there YZ 125's. Now that I dropped the coin for a R.B mod carb. I am totally happy with the R.B carb, just need to lean out the pilot side a little bit more.

    I may have to blow a call into Kevin @ Lectron and see where he is at with that carb....thanks for the scoop!
    Rick, Aug 8, 2013
    #24
Page 2 of 2