125-200cc Future Parts Availability?

Probably the weakest point will be the blind bearing on the end of the clutch shaft. A little on the small side and any time I have found an issue in these trannies that has been the weakest link. It will make noise long before it grenades so you should have warning. I have tons of parts so if something goes south let me know.

Funny, or maybe not, I think my 165 is making a new noise and can't pin it down. Does sound like maybe bottom end motor noise, but not sure yet.

How any hours on bottom end Steve?

Meter says 155. Hoping it's not bottom end prob's !

I can attest, first hand, KTM is finally starting to stock parts. If you need major parts call your dealer and they may have to be shipped from Austria, but you'll be able to get them. I've been told by Hall's that Husky will supply parts for 7 - 10 y/o bikes (depending on the bike?) and newer. So if it's 7 years for the WR, I'm at the end of support with my 2009 WR. But if it's 10 years, then I may consider keeping it for another year or so.

Yeah but 09 wr250 same back to early 2000 late 90s more or less so ya sweet

Edit: meant to say same rite up til 13/14 more or less as well so ya golden

Well that's good news, even at 7 years I'm good for awhile.

The last year of production was 2014 for your WR 250 so parts should be coming for quite a while. The husky 2 strokes should really never have a problem since a lot of the parts are available aftermarket of on ebay.