Handle bar rubber mounts

Yes it does

Xtrig made either the complete triple clamps, as shown on the picture above, or an upper triple clamp in black to be mounted together with the original lower triple clamp.

Both accept the PHDS bar mounts

jeanjean

Hello,
sorry for hijacking this thread, but i have the same problem with these stupid rubber mounts, which "rubber killers" fit the husky triple clamps for sure? Honda? Here in germany i cant find any specifically for huskys, so i think i need to get some that are for more mainstream bikes. Husky has 10mm screws fixing the handlebar mounts, and honda seems to use 12mm, how did you solve this?
Moritz

Not sure, but the Honda rubber killers for Honda (e.g. the Zeta shown a couple of posts above) should fit, that is to say they may have the same cone angle, but are higher.
You can see on the pictures above that the protrude from the upper clamp. You bar will therefore be higher than with the original bar mounts.

To compensate the inner diameter, you can use the original sleeves or use a piece of 10/12 mm tube (available in the next "Baumarkt" (home depot)).

If you want them damped, you can try the oem Honda phds mounts with integrated cones.

There is one complete triple clamp available in the UK (I bought the one which was sold in Germany ;-) )
https://www.ebay.de/itm/husqvarna-3...914883?hash=item363136e403:g:JfUAAOSw99Ra6XxR

jeanjean