1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

Interesting NOS Acerbis front fender????

Discussion in 'Vintage/Left Kickers' started by 1Tuff500XC, Sep 19, 2010.

  1. 1Tuff500XC Husqvarna
    AA Class

    Cool, I'd like to see a picture of the BAJA fender. Sounds interesting.

    I'll shoot you a PM right now then, thanks.
  2. enduro250z Husqvarna
    AA Class

    Location:
    Australia
    Ok that basically shows what i do have

    A) appolgies for showing this stuff in here and not classifieds, its just that i thought it would be good to continue it in this thread and keep the same info together with pics. so people can use this thread for future reference.

    B) All these extensions were very hard to find 5 or 6 years ago. I had to contact a lot of old importers worldwide and got pretty much all of what the factory had left. After i cleared them out they only had a few things left in un-common colours like green and orange.

    C) Due to the rarity of these, my prices are quite reasonable everything is under $25 AUD. i could list this stuff on ebay and get more but i havent got time.

    D) The fenders that these suit, although hard and sometimes a hassle to get, can still be found if you do a bit of hunting and they are a lot easier to find than these extensions. The Acerbis BAJA & NOST fenders shouldnt be too hard to find in white as that was basically the last colour they did them in. Gradually evey year or so they were deleting other colours but i last saw the BAJA & NOST fenders in white in the Acerbis catalogues a year or so ago.

    E) If you send me a PM, i may be a little slow to reply but i will get to you. i only check this forum every couple of days. I wont be ignoring you.

    F) All the stuff i have is NOS and in original packets and in excellent condtion

    Cheers.
  3. 1Tuff500XC Husqvarna
    AA Class

    Already sent ya a PM, thanks........
  4. 1Tuff500XC Husqvarna
    AA Class

    OK Leith, just emailed you a few minutes ago. I as well, will be away after this, for atleats a few hours till tomorrow.

    That Baja fender, and the extensions for it look pretty interesting. I never noticed those before.

    I'll have to go nail down what I have and need tomorrow, thanks.

    Fun stuff..........
  5. enduro250z Husqvarna
    AA Class

    Location:
    Australia
    I have gone none Acerbis Baja front fenders
  6. 1Tuff500XC Husqvarna
    AA Class

    What???? :excuseme:
  7. Hwy Mini-Sponsor

    Location:
    SF Bay Area
    Husqvarna Motorcycle:
    '86 510TX / '90 250WXE / '87 510TE
    Other Motorcycles:
    '04 KTM 525MXC / '91 KTM 300DXC
    Acerbis BAJA front fenders for big bikes are not an easy find.
    Anyone know where these are available?
  8. 1Tuff500XC Husqvarna
    AA Class

    Any other pics of the Baja fenders???? They sure look interesting to me. I don't need one, just curious. So they are aimed at providing even more coverage than just the extensions on the standard Nost fender?
  9. enduro250z Husqvarna
    AA Class

    Location:
    Australia
    YES the Baja with and without extensions offer a bit more coverage than the Nost. The Baja also has always had the vents. The vent cover on the Baja alos stayed on the fender and you just slid it open or closed (very cool) but on the Nost it you had to remove it from the fender to open the vents. I think part of the reason they took the vents off the Nost fender is that they already had the vented Baja and didnt see the point in offering 2 vented front fenders. I reckon i still have a couple NOS white Baja vent covers too. Another difference is that the Baja fender extensions were smooth finish but the Nost extensions were more rough/matt. The Nost front and rear fenders were basicially their 'MX' fenders and the Baja fenders were 'enduro/XC' fenders. The Baja rear fender had a tail light built in. The other model they had was the 'Rally' front fener which was sort of a larger curve fender with a shorter rear section which suited big 500/600 4 strokes like XT600, TT600, XR600, XL600 etc.

    I have a new Yellow Baja front fender (not for sale) so i will take a photo of it. I will also look on my computer to see if i have an other photos.

    If i forget send me a PM and remond me:)

    Try in the UK, particularly Acerbis UK/Bert Harkins Racing
    http://www.bertharkinsracing.co.uk/

    Most of the stuff i have shown i sourced through
    http://www.motocrossworld.com/site/index.php

    who got it all from Italy for me via Acerbis UK

    Baja part number is 8014

    I am confident you would be able to find them in white.

    also try Acerbis USA

    I did some quick googling and found one here

    http://www.mc-japan.net/shopping/acerbis_p/fender_tail/menu.htm

    also photos here

    http://ameblo.jp/r100gs/image-10045262169-10029823765.html

    and

    http://www.renehanisch.de/inhalt/verkauf.htm

    and here

    http://www.atic.org/accessory/misc.php

    if you try from here make sure its the Baja 8014. Thats the one they show in white but the text says RALLY and NOST. The RALLY is also another fender similar to the NOST & BAJA

    this place shows the MINI BAJA. Might pay to ask if they have the full size version. i havent checked their store though.
    http://www.atlantamotorworld.com/es..._product_907305.ACERBIS_BAJA_FRONT_FENDER.htm
  10. 1Tuff500XC Husqvarna
    AA Class

    The Baja front fender is growing on me, as far as it's looks go. That with the extension would be pretty cool.

    Great links, I took a look at all of them.

    Thanks for posting...........
  11. enduro250z Husqvarna
    AA Class

    Location:
    Australia
    Yeah there was a time where i really liked it too. Took me ages to find 2in yellow and a blue extension. I had 2 white ones and a blue one but i sold them a couple years ago. I reckon i know where some blue and green ones are.

    Sear for a ebay seller called 'eddytwinshock' I know i have seen him list a lot of old Acerbis stuff.

    Heres a pic of some early Nost fenders around 83/84

    [IMG]

    Close up of sticker

    [IMG]
  12. enduro250z Husqvarna
    AA Class

    Location:
    Australia
    Just remembered DC plastics http://www.dcvmx.com are reproducing the Acerbis Nost front fender and optional front extensions. I cant find them on their new site but i know they do have them and have been selling them. Here is a photo off their old site

    [IMG]
  13. 1Tuff500XC Husqvarna
    AA Class

    Now that I kinda know what I'm looking at, I've noted a small number of bikes with the Acerbis Baja front fender.

    Was there any extension for the rear portion of the Baja's ever available???? I may try to get my hands on one of those Baja fenders as well.
  14. enduro250z Husqvarna
    AA Class

    Location:
    Australia
    No, ive never seen them in any catalogues. I did try and mount the nost extension on on the back part of the baja, although its not made for the Baja, you can get it to fit sort of OK.

    When i was looking around today i did see i had a couple NOS white vent covers for the Baja, think i may have a red and blue too.
  15. hedhunter9 Husqvarna
    C Class

    Location:
    Indiana
    Preston Petty "Mudder" fenders are now available again.

    Someone bought out Preston Pettys patent and has started producing a few different front fenders and some rear fenders along with the Preston Petty headlight. (paul ? I think)

    Bob Bean

    1986 ISDE Italy
    1987 ISDE Poland
    1989 ISDE Germany
  16. 1Tuff500XC Husqvarna
    AA Class

    Mudder fenders huh? Any pics? Sounds interesting.

    The headlight sounds interesting as well. My Husky/Acerbis numberplate headlight plastic is hurt, so I was wondering if there are alternatives to the DC plastics repro.
  17. enduro250z Husqvarna
    AA Class

    Location:
    Australia
    Stictly Hodaka now have the rights to re-producing Preston Petty parts

    http://www.strictlyhodaka.com/prestonpetty.html

    For headlight you have an option of Cemoto

    [IMG]
    http://www.motoduro.co.uk/include/enduro4.php

    You can see/buy it here if motoduro has none left.
    http://www.cemoto.it/articolo.php?id=35

    Cemoto #2208
    [IMG]

    Cemoto #2620
    [IMG]

    Cemoto #2090
    [IMG]



    To order a Cemoto one you can get them from here http://ktmklassiker.at they order from Cemoto every couple weeks and provide a fast no fuss service to worldwide customers.

    Another Option is the UFO vintage light

    http://www.mdracingproducts.co.uk/products/universal-headlight/

    [IMG]

    Also available from KTM Klassiker and Motoduro

    For more info download UFO vintage plastics catalogue here
    http://www.ufoplast.com/en/