1. 2 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
     TE = 2st Enduro & TC = 2st Cross

TE/TC JD Jetting kit on my TE300 (so far good)

Discussion in '2st' started by robertaccio, Apr 6, 2014.

Page 2 of 2

  1. Bryan M Husqvarna
    A Class

    Husqvarna Motorcycle:
    2012 wr300
    Other Motorcycles:
    10 GasGas ec300, 12 Ducati Monster
    Actually got a chance to ride with the 162 in tonight...ran awesome at 3300 ft 55 degrees. Very crisp and pulled hard. We will se how it is as 4 to 6k feet friday:)
    Bryan M, May 7, 2014
    #21
    robertaccio likes this.

  2. PDL Husqvarna
    AA Class

    Location:
    amarillo, texas
    Husqvarna Motorcycle:
    2014 TE 300
    Other Motorcycles:
    Honda Crf 450X, Ktm 625 SXC....
    I rode thru all the heat cycles today. It ran a little flat but got better thru the cycles. I did nothing to the suspension prior to riding and found it to be really good. When I got in I set the sag and installed the JD kit to per instructions. I hope to run it again tomorrow but it will probably be next week. I think this is going to be an awesome bike!!!
    PDL, Aug 23, 2014
    #22
    robertaccio likes this.

  3. Benjimoto Husqvarna
    AA Class

    Location:
    Lincolnshire, UK
    Husqvarna Motorcycle:
    TE 300
    Other Motorcycles:
    KTM 150xc Hypermotard sp
    Sounds like the JD jet kit works well. Is the needle available to buy separately as I have all the jets?
    Benjimoto, Aug 30, 2014
    #23

  4. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    call jd or order from your dealer its the kit with all the parts and instructions
    robertaccio, Aug 31, 2014
    #24
Page 2 of 2