250-500cc Kick stand replacement.

Lost mine, very expensive to replace with OEM. Longer bolt with nylon nut on the extra threads sticking out the back should never fall off again.

Has anyone bought an after market stand? I picked up a 2012 WR300 with no kick stand on it. OEM is usually pricey so looking for a good aftermarket recomendation if you have on.

Still looking myself might fab one myself they are spendy

I lost my kickstand spring. I hold up the stand with a KTM rubber thingy now, although I installed it poorly and have been using zip ties to make sure the stand doesn't fall. Maybe I'll just ditch the stand entirely.

Anyone know where to get a husqvarna te449/511 style frame tab for the kickstand??

I have a stock TE kickstand I would like to install on my 2000 cr125. I need the tab and bolt tho.

Any ideas for a replacement stand ?
Mine was bent to far forward and now its been bent / snapped and modified to straight its not going up past the swing arm

Take it off put it in a vice an give it a blow with a mallet to get clearance.

Sometimes (and over time), the metal frame tag gets bent out as well...bit of heat and the knockometer does the trick.

It snapped trying to heat and bend back to original shape .
They rewelded it but the angles are wrong now in the other direction -
I can possibly get it reshaped but the guy doesn't think its going to work
I was wondering about alternatives

Trees, triangle or try a universal one.

You got a pic Rocky?

its ok I ll get him to have another crack or take it to someone else
I wouldn't mind a pic or pics of what the angle of the join near the bolt is supposed to be

I too have been looking for a kickstand. OEM or otherwise. My '14 WR300 didn't have the kickstand on it. The dealer had no idea where it was or what happened to it. I use trees, triangle stands and bike stands, but a kickstand is nice to have.

I've looked for aftermarket sources, but, not found anything. Even posted a "wanted" add in the classifieds here. No luck.

Heath

You could try one of these
look a bit cheap and not a great design but may be ok
They are cheap

http://www.ebay.com/itm/Universal-Motorcycle-Clamp-On-Side-Kick-Stand-/381546792605

oh lord..

i take it you have tried someone like halls and they arent available??

I think OEM is over $200 AUD

Rocky, do you need a pic of the where the stand bolts onto the frame or stand join itself?

If your stand is on the bike a close up of the stand near the bolt from the side angle - if you can

Hard to justify the cost of OEM.

Heath