Lectron husky fitment update...

Discussion in 'Motosportz' started by Motosportz, Jan 29, 2013.

  1. Anthony_1978 Husqvarna
    AA Class

    Location:
    Melbourne
    thanks mate:thumbsup:
    huskybear likes this.
  2. DaveG321 Husqvarna
    A Class

    Location:
    Easton mass.
    Hey Huskybear,I just copied your,e mod on my 09 WB165 and was look,n close at your,e picks and it looks like your,e carb isn,t pushed in enouph at the intake boot,there is a ridge that the small end of the carb has to go against,part of me wishes I left my boot alone and I,m sure it will be fine,just wish I could have cut 1/2 inch off but, with the ridge you have no choice but to go 3/4 inch.Will be testing the carb soon and just around my lawn the bike feels great and so far I only had to lower the idle just a tad,cross my fingers and I won,t need to do much more.
  3. typeone Husqvarna
    Pro Class

    Location:
    central MA
    Husqvarna Motorcycle:
    07 TC270 + 09 WR165
    Other Motorcycles:
    08 X4 146 + 13 250RR
    Dave, that's a really good point/observation... it looks like huskybear has the longer carb that originally shipped before the 3mm trimmed version was available.
  4. Blakelpd5 Husqvarna
    Pro Class

    Location:
    Tigard, OR
    Husqvarna Motorcycle:
    09 WRWB165
    Other Motorcycles:
    08 CRF450R, 1980 Suzuki Wetbike
    I have the trimmed carb, and it still fits fine with 3/4" trimmed off...
  5. huskybear Husqvarna
    Pro Class

    Location:
    B.C. Canada
    Husqvarna Motorcycle:
    2010 wr144 with lectron carb, stuff!
    Good eye! my carb is the slightly longer version and is all the way into the intake boot. I have no regrets about cutting my air-boot,fits great and the carb is very easy to remove:cheers: