1. 2 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
    TE = 2st Enduro & TC = 2st Cross

TE/TC Lectron

Discussion in '2st' started by HuskyDave, Aug 1, 2016.

  1. HuskyDave Husqvarna
    A Class

    Location:
    Zelienople, PA
    Husqvarna Motorcycle:
    2016 TE 300
    I'm interested as well.
  2. DTX915 Husqvarna
    Pro Class

    Husqvarna Motorcycle:
    wr125
    Other Motorcycles:
    kdx200 tt500 yz450 klx125
    Take a look at the S&W custom shop 1911 in 9mm. Its ok to have a lectron and a 1911 !
    1911 9mm.png
  3. DTX915 Husqvarna
    Pro Class

    Husqvarna Motorcycle:
    wr125
    Other Motorcycles:
    kdx200 tt500 yz450 klx125


    Watch the float height. Mine would move higher in the bowl during the ride. The bike would begin to run sluggish as the fuel height went up. David sent me a new needle seat as its a one piece part so getting the jet out would junk the part. Once replaced I have had no problems. I noticed that if the fuel is over the top of the little line the bike runs sluggish. With the carb tipped so far forward I found setting the level off the bike worked better.
  4. reveille Husqvarna
    Pro Class

    Location:
    Northern Illinois
    Husqvarna Motorcycle:
    2014 FE501
    Other Motorcycles:
    2015 300 XC W
    It ended up being my reeds. One of the reed petals in the middle completely broke off and the engine swallow it. The new reeds came yesterday and I will reassemble the bike today and pray for the best. I also replaced my needle seat valve in the carb because the stock one looked deformed.
    eddychecker likes this.
  5. troy deck Husqvarna
    Pro Class

    Location:
    Republic MO
    Husqvarna Motorcycle:
    87 250wr 12 cr125
    Other Motorcycles:
    kx65 ty80 rm80 kdx250
    FIBER REEDS ARE DIGESTIBLE
    reveille, justintendo and NCSteve like this.
  6. justintendo klotz super techniplate junkie

    Location:
    mercer, pa/northwest pa
    Husqvarna Motorcycle:
    84 250,86 400,87 430,88 250,95 360
    Other Motorcycles:
    99 kawasaki zrx 1100
    it likely blew out of the exhaust or is stuck to the interior of the pipe, lol
    NCSteve likes this.