125-200cc Linkage bearings removal.

oneal · Dec 16, 2013

Do you have the link to the original thread. As im interested in putting grease nipples in the lower shock bushes on both of my bikes.

troy deck · Dec 16, 2013

Kreza said: ↑

Troy Deck, below is a copy of another post. So am I allowed to call myself a genius?

I machined out those annoying shoulders in the linkage so in future if needed I can press the bearings straight out. I didn't do it on the forked arm of the linkage as it would leave only 2mm of material.

Fitted grease nipples slightly different from Picklito, and also in the forked arm.

Used the HK2016-AS1 bearing in the lower fork.

I didn't put grease nipples on the swing arm because I couldn't find a decent spot to access them or to prevent them breaking during use. Instead I butted up the 2 bearings together then added a seal to the outer side of both outside bearings. A bit of extra insurance against those small seals on the needle bearings.

you are a genius i knew these was at least one on here now what ever happened to cansilia [or sumpin close to that ] products back in the 80s they made rifle drilled linkage bolts with zerks for quick n ez greasing ?? anybody

Kreza · Dec 17, 2013

oneal said: ↑

Do you have the link to the original thread. As im interested in putting grease nipples in the lower shock bushes on both of my bikes.

http://www.cafehusky.com/threads/check-your-rear-suspension.23512/page-4#post-332739

Log in or Sign up

125-200cc Linkage bearings removal.

oneal Husqvarna
AA Class

troy deck Husqvarna
Pro Class

Kreza Husqvarna
AA Class

Log in or Sign up

125-200cc Linkage bearings removal.

oneal HusqvarnaAA Class

troy deck HusqvarnaPro Class

Kreza HusqvarnaAA Class

oneal Husqvarna
AA Class

troy deck Husqvarna
Pro Class

Kreza Husqvarna
AA Class