1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Living with a TMX 38, my new WR125 setup

Discussion in '2 Stroke' started by Bloodline, Jan 7, 2015.

Page 2 of 2

  1. Bloodline Husqvarna
    AA Class

    Husqvarna Motorcycle:
    WR125
    I rode it for an hour in the woods yesterday. Runs quite well.

    Started first kick. Idles while I put my helmet and gloves on. No splooge. Pulls hard thru the revs. Doing a 200 mile ride this weekend and I'm leaving it where it is.

    sea level, 55 degrees, 15PJ, stock needle in #2 clip, #4 slide, 430 main, 50% VP110/ 50% 93 no ethanol @ 32:1.
    Bloodline, Jan 12, 2015
    #21
    justintendo and juicypips like this.

  2. juicypips Husqvarna
    Pro Class

    Location:
    gloucestershire
    Husqvarna Motorcycle:
    wr 360. 2002
    Other Motorcycles:
    Gas Gas TxT 300, Yamaha wr250f
    Enjoy thrashing the beast.
    juicypips, Jan 12, 2015
    #22

  3. Down Under XC Husqvarna
    AA Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    XC250 83', WR250 87','XC150 10
    Other Motorcycles:
    WR165 10, 83 KDX 250,
    Hi Bloodline,
    I also went down to 15 with our XC 150 and 17.5 on our WR 165 and both idle sweet and no issues coming off idle. we are at 300m above sea level and a dry climate where we ride. I also run the RM needle and you can try a half needle clip washer as well which I have used successfully in past.
    Down Under XC, Feb 4, 2015
    #23
Page 2 of 2