Magnificent 7

not cheap...but at least it will be right..and good for another 30 years

Be dead by then! You guys can reap the rewards on ebay someday!

I rest my case!

Can't find the CR 390 decal so for now 390 OR

This gives better idea where this is headed to?

You guys like or just part out on ebay?

i think its going to look great. i wasnt wild about the bare spot around the counter before, but after you mocked it up it actually looks really good.

You not have some faith in ol Typpy ?

Thanx Just.....

Remember, gonna make a nice aluminum more modern looking case saver.

Working today on getting bushings, cyl studs, etc... Plated and on.
Ha! Had real nice set of rear engine mounts plated. I cannot find them!
I've been through every box! Very frustrating cause I don't know where they are!

very sharp item your producing there mr typpt!

Thanx Surprize!

Here, this one got a mohawk too!

excellent detailing...I made mine a redhead!

Finished the head this am and I polished the under side of head to transition from cylinder to head.

Here is engine fitted in bike again.

Couple more:

It's getting there. Front motor mount brackets polished.
Making my own rear motor mounts out of aluminum.
Found set so will use bushings to press in these.
Just need a drill bit to proper size for bushings.

Soon as I get the bushings. I will drill these to press them in.
Plus going to weld that aluminum spacer in so it will be more water proof then in can install a grease fitting in spacer.

Think it's coming along?

the rear mount looks pretty trick, not a bad idea welding that tube in with a zerk.

I know you stare at these all day but they should be in the Guggenheim! (is that what its called??)

Heck if I know? Only thing I know is Google!

As soon as I get this 390 bottom end together. Then I can start on the 125.
If I run the numbers correct? Looks like there is a possibility for me to 144 it or shall I say have a 150.
If not then worse case scenario is I can 134-135 it. Then I will use a rm 125 pipe on it.

there was 125 in that mess??? KOOL where at on the milk truck ?

Bottom end is buttoned up.
So want to finish the rest.
Then I will work on getting them all bored and in frames.