Magnificent 7

You've got some "Mad Skilz" ........

Thanx guys!

Rest of materials arrived to finish the 430 pipe.

Next up, going to order materials for the 83 CR 250.

Then I'm done with pipes.

Working on 430 piper! Stalled on finishing the cylinder paint job. Then that has to go on so I can align piper up to fit.

I think your gonna like the cylinder art work!

However, I have been working on the pipes,cuts,fitting and welding some.

Feel like Peter Piper Picked a Peck of Purple Piper Parts!

All my piper parts to build the 83 CR 250 piper are on their way.

This is the 430 cylinder. Had to do it this way since I notice a cracked strap that runs up and down plus a cracked fin.

So I welded in a section of aluminum and just put the Husky lettering on it.

Same on both sides.

Better to find the crack now. Nice repair.

Thanx! Glad we think alike on that one.

I had to shave a fin down so that's why I had to do it that way. Couldnt get the tig tip back in there.

Now I can finish pipe this weekend! Meow!

Looks sharp in person!

Nice work! as usuall

Thanx OBD! Hope to see how pipe looks on it.

Hopefully get some pics up by Sunday night.

Progress!

Pipe done and may blue yet?

This piper I did a brass Husky badge on to match gold scheme.

This is what 25 hours work lands you.

I call that piper...... Masterblaster!

Who run Bardertown ? Masterblaster!

Should have plenty of Torque!

Great looking pipe....you will be known for your pipes soon.

I like that one better than the earlier one you did. The shorter cones look so much more professional

Thanx OBD!

Almost half tempted to make the 83 CR 250 one a snail one. I think I have a silencer that I can use on the end.

Yeah I like this one too but heck of a lot more pipe cuts, fitting joints and a lot more welding.

I welded a Yamaha pipe to a husky 83/250 pipe. With the curly Q in the beginning. It came out ok and ran ok but yours looks awesome. A lot of work goes into making these.

Let me know if your going to sell these.

Bill,

Thanx for asking but.........

Not at the moment. I work mon-fri easy 60 hrs week. So all I have is weekends, plus I want to get these finished.
I have couple gas tanks to do for a friend and guy on here. That's it..... I've turned down about 10 tanks to removed dents and paint since Fall. Plus, I gotta start on me Maico to finish as well.

Ok, so here is my next piper for two fiffy!

Believe you me, I almost turned this one into a snail pipe but I did not have the right end silencer in my arsenal.

Think I will do some digging to find the right one that would work. It has to have a snap ring in the bottom of it so I can repack it and also weld right into the pipe.

I had it mocked up with masking tape. It does look bad ass, so think I'll do one for fox bike.

You will always know my pipe cause I put a husky badge on them.

This one was lil tough to get end perfect for my silencer. I still have to make a silencer bracket but had to wait till pipe was done.

I'm stalled out because i ran out of Argon gas for my tig welder.

Just putting some final touches on the 125 pipe.

I did the badge in stainless and brass to give it a rustic look with the black and gold tank.

Also, if you remember I did the XC on it.