1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

250-500cc Magura hydralic clutchs

Discussion in '2 Stroke' started by firecrotch, Jun 9, 2011.

  1. aya16 Husqvarna
    A Class

    Location:
    long beach ca
    Im not a fan of the hydraulic clutch, If your stock clutch is a little hard, I would reroute the cable or replace the cable.
    some people just have to have one though, but beware, if it goes out on a long ride, that's it, no fix on the trail. Plus you will need a spare
    clutch handle, as a typical manual clutch handle can't be used. For me it's not worth it.....
    Mike
  2. firecrotch Husqvarna
    Pro Class

    Location:
    north bend, wa
    Husqvarna Motorcycle:
    2009 wr300
    Other Motorcycles:
    2007 ktm 950SM
    Yeah, i hear ya..i actually zip tie a spare throttle and clutch cable alongside the regular ones as I have had both fray and fail on previous bikes.
  3. windsurf Husqvarna
    AA Class

    Location:
    queesland
    I agree, the clutch isn't heavy if its properly adjusted. I don't know how much you guys use the clutch, personally I only use it for setting off and any difficult technical hills.
  4. firecrotch Husqvarna
    Pro Class

    Location:
    north bend, wa
    Husqvarna Motorcycle:
    2009 wr300
    Other Motorcycles:
    2007 ktm 950SM
    I use it constantly. My MX days got me into that habit. I dont even notice I am doing it until the arm pump starts getting bad.