1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Piston / Rings Replacment Discussion

Discussion in '4 Stroke' started by Fast1, Feb 20, 2009.

Page 2 of 2

  1. MOTORHEAD Husqvarna
    Pro Class

    Location:
    Mount Vernon, Indiana
    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    2014 YAMAHA YZ250
    I don't plan to go that far into the motor. I'm just going to pull the head and cylinder, but if I needed a rod or crank work, Falicon would be first place I'd call.

    Eurofreak, are you sure about pulling the top end while the motor's in the frame? It looks awful close.
    MOTORHEAD, Apr 20, 2009
    #21

  2. Huskybloke Husqvarna
    AA Class

    Location:
    maitland AUST
    yep i understand how that would do that.cheers
    Huskybloke, Apr 20, 2009
    #22

  3. MOTORHEAD Husqvarna
    Pro Class

    Location:
    Mount Vernon, Indiana
    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    2014 YAMAHA YZ250
    To answer my own question, yes, you can pull the top end while it's in the frame, barely. I had to disconnect the front cam chain slider to get it off on my TE.
    MOTORHEAD, Apr 22, 2009
    #23

  4. tref Husqvarna
    B Class

    Location:
    montenegro
    I was tray to pull off cilinder head when motor is in the frame and not possible,this is on sm 510r 2007 year,:banghead:
    tref, Apr 23, 2009
    #24

  5. MOTORHEAD Husqvarna
    Pro Class

    Location:
    Mount Vernon, Indiana
    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    2014 YAMAHA YZ250
    '08 te510. Not sure about any others.
    MOTORHEAD, Apr 23, 2009
    #25

  6. dirt rider x Husqvarna
    AA Class

    Location:
    Australia
    04 TE450 definately wont

    :thumbsdown:only misses by about 6mm
    dirt rider x, Apr 25, 2009
    #26
Page 2 of 2