Race discs brake disc.

I must be light on my rear brake!

I'm hard on my back brake I know. I do a lot of muddy single track riding. But with the stock set up my pads lasted forever. Just my luck I sold the stock set up too!

that rattle used to shit me to tears!

I have a few stock wr 250 solid and vented stock rotor off a cr 250 plus a few stock caliper mounts both brand new and used I will gladly trade you for your zip ty bigger rear brake set up let me know I will ups to you no problem john

I just bought a Braking rotor on ebay which I believe is the bigger size. Hopefully that'll cure the burning through pads I've been having. I'll be in touch if I still want to go back to the OE set up. Thanks, Len

cant find braking brand on ebay powerkord. got a link or know how much fronts were by chance?

Here is one in Australia

http://www.ebay.com/itm/Front-Brake...11?pt=LH_DefaultDomain_15&hash=item4d2787d75f

cheers anyway PK but them blokes bit of a rip off from what ive seen! want top dollar for beat up gear. bet that disc has fair bit of wear. S3 performance here in AUS make one, its a bit ugly imho but supposedly good quality & long wearing without being a pad chewer plus I wont see it while im riding! . might try Aussie made as its only around $100 delivered. will report back how it goes

Yeah, please do. I will post once I get a few rides on my new pad and rotors. Hope they get here before the weekend!

I found this on ebay recently:
http://www.ebay.com/itm/Husqvarna-3...844?pt=LH_DefaultDomain_3&hash=item2c9c3072d4
If you search the store "husqvarna disc" it seems they only have rear discs, but for many Husky models, even old 360s!

I also found RHK make a disc to suit & also motomaster 'nitro' model(cheaper version of the 'flame' which cairoli/ktm use)! both around the $100-$130 mark delivered in Australia! think im gonna go with the motomaster disc as its the cheapest(by $7 ) surprisingly & best looking design IMO. RHK be my second choice purely for cosmetic reasons(most expensive by some $23) over the 3rd placed aussie made S3 disc9(average looker).

I'm getting some brake fade at @ 2 hour mark and was planning to order the RaceDisc as part of a cheaper solution. Already flushed it with fresh DOT4 fluid, maybe try some 5.1 too. Now I'm a little worried about the QC of the RD parts QC on the Brembo or Braking parts shouldn't be an issue. Stopping power is fine to me, just need to relieve the brake fade.

I have not scene that Nitro disc before; nice looking unit. Here is my brand new Braking disc. Good riddance RaceDisc!

Thanks for the update So that's an "oversized" rotor with the ZipTy carrier? With the sharkfin removed?

Yes, I removed the shark fin.