Royal Rods

Rod kit and gasket set ordered from Dave, nearly $600AUD delivered.
Case closed, pardon the pun!
Tony.

Harrow entries open Tony, have you entered yet!!!

Not yet JC, the 11+ hour drive is a bit of a deterrent, what are the rego requirements?
Day permits? What does the bike need for a day permit? I could bring the 85.5 or either of the 88's (same as 87's under the follow on rule), is that correct?
Tony.

any single pre 90 is eligible, you can get 48 hr UPV from vicroads. check out the VERI website to enter. will be big weekend

7 days ago I ordered these items from Dave (tritrophy) and they arrived today on the opposite side of the planet in Michelago NSW Australia!
Great service and fast delivery from a trusted seller.
Tony.

http://www.hva-factory.com/cranksha...n-rod-135mm-centres-x-58mm-long-pin-161982501

http://www.hva-factory.com/cranksha...od-135-centres-x-52mm-long-crank-pin-16106420

http://www.hva-factory.com/cranksha...-kit-con-rod-1982-1988-161982901-16-19-829-01

Minimum of 50 of each type in stock.

Andy.

Andy do you have any source for 82 and 83 125/175 rod kits, and 82/83 175 pistons and rings?

I did consider your products Andy but with our exchange rate it would have added around $150AUD to the same order.
Tony.

Dave has 125 rods for 82/83
have fun on an 83 175 piston

Thx Joe. Yes, that’s why I asked (sad face).

make it a 125 and call it a day

Joe...when you say "125"...do you also mean he has rods for the 72/73/74 125's???
See you at KF...

I believe its the same rod for all Swedish 125s.

I do run Royal/Mitaka Rods on several Bikes, i replace about 5 a year on multiple bikes in my area- these rods do last!

I had lot more problems with hotrods/wiseco.