Sherco 250 SE-R...impression

Discussion in 'Non-Husqvarna Motorcycles' started by PowerKord, Aug 21, 2015.

Page 2 of 2

  1. Boogie Husqvarna
    Pro Class

    Location:
    Australia
    Husqvarna Motorcycle:
    Red head
    This one looks to be cut right where that rear bracket started. That would have to be 100mm or so yeah? (I'm not near my bike to check...)

    [IMG]
    Boogie, Sep 1, 2015
    #21
    PowerKord likes this.

  2. PowerKord Husqvarna
    AA Class

    Location:
    Notheast Ohio
    Husqvarna Motorcycle:
    2008 WR 250 Sold
    Other Motorcycles:
    2014 Sherco SE-R 250
    That bike may not be using the rear mount at all. Thanks for posting, I'd be interested in something like that if it did use both mounts.
    PowerKord, Sep 1, 2015
    #22
    Boogie likes this.

  3. GMP Husqvarna
    AA Class

    Location:
    NJ
    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    '13 Beta 300RR Racing
    You could always make up a new rear mount/bracket if needed. Likely you can get a couple inches off without a problem, doubt its that close. My Beta/FMF was an easy three inches. Why have that big lever hanging out there to bend your subframe? Even a minor tipover with the can hitting a rock will do it, seen it happen several times.
    GMP, Sep 2, 2015
    #23
    shawbagga and john01 like this.
Page 2 of 2