Sidestand Options

Discussion in '610/630' started by zoomdude57, Jun 19, 2009.

Page 2 of 2

  1. Luigic81 Husqvarna
    A Class

    Location:
    Hillsboro, OR
    I cant get that big spring on for the life of me, I even trid heaing it up with me heat gun to about 950 degrees
    Luigic81, Sep 6, 2009
    #21

  2. Luigic81 Husqvarna
    A Class

    Location:
    Hillsboro, OR
    maybe i'll try removing the stand and mounting the springs first, then try to mount the stand to the bike
    Luigic81, Sep 6, 2009
    #22

  3. brisendines Husqvarna
    A Class

    Location:
    Denver
    Did you try with the kickstand folded up? Should be easier than with the kickstand down.
    brisendines, Sep 6, 2009
    #23

  4. Luigic81 Husqvarna
    A Class

    Location:
    Hillsboro, OR
    finally got it on with some help from the wife :doh:

    I had to put the spins on the kickstand and subframe first, then man-handle the kickstand into position to line the holes up, and then have the wife whack the bolt in with a hammer until it was in far enough to start threading. Hopefully the 40oz of locktite I put on there will ensure that I never have to do it again :)
    Luigic81, Sep 7, 2009
    #24
Page 2 of 2