SWM-IT Husky parts cross over list.

Just an update......might be the same sprocket as Aprilia 450 / 550. Jt sprockets p/n jtf707.
I'll do some more homework and get back to you.

Righto. Did some measuring this morning.

Swm countershaft : 25mm OD, 21.5mm Core dia.
Swm sprocket has a core dia of 22mm, width 11mm.
(These dimensions are actual measurements not specs)

JT give the dimensions of the aprilia sprocket as 25mm x 22.2mm x 10.9mm.

What do we think, crossover or not?

Ps I will be contacting my swm dealer tomorrow regarding price, options and availability.

Double check as JT(in my experience) are notorious for wrong model years/part numbers!

Both Renthal and Sunstar make CS sprocket for your 165, much better quality than JT.
FYI: Renthal part # 307-520-13GP (13 tooth) fits Italian CR/WR 125 back to 1998.

Cheers mate, but I'm looking for swm rs500 front sprocket

Sorry, missed that part...nevermind

Went to my local Aprilia dealer today and checked out an rxv 450 / 550 front sprocket.....certainly looked the same as the original swm. Bought it and fitted it. Seems to be a cross over item.

Apologise for the lead up posts clogging the thread......delete them if you'd like, call it house keeping. Lol.

For future reference the SWM engines are not based on the BMW era IT-Husky "Red Head", but on the prior 2010 era IT-Husky engines that Ampelio Macchi designed. Yes, the new SWMs have a "red head" valve cover just to keep the conversation going.

Hello guys .
Just to give you a salute and thank from France, some SWM down for few parts ...

Hi,

Does anyone know if the exhaust systems from the SM510R fit the SWM sm500?

Thanks,

Mike.

I'd just about put me left one on it being the same or same fitment.

Anybody have the Superdual spare parts catalog? I've got the SR650R one, and it would be fine to have also the superdual one...

OK, I've got it. Here the link (on "superdual 2017")

[PDF]

Superdual 2017

www.swm-motoren.nl/.../SPAREPARTS_CATALOGUE_-_SUPERDUAL_650_MY17_...

The present spare parts list enables one to order exactly the right spare parts. ... Ca cataloguepermet de commander correctement les pièces de rechange.

And for the RS 650 R,

[PDF]

RS 650 R 2016 SM 650 R 2016 - MHB Motorcycles

mhbmotorcycles.com/wp-content/uploads/2017/09/QUICK-MANUAL-RS650R.pdf

Quick Reference Manual ... Uso e Manutenzione scaricabile dal sito www .swm- ... tuisce prova dell'avvenuta esecuzione dei tagliandi. RS R 650. SM R 650.

Falta: spare ‎parts

[PDF]

RS 650 R 2016 SM 650 R 2016 - MHB Motorcycles

mhbmotorcycles.com/wp.../MANUAL-OPERATION-MAINTENANCE-RS650R.pdf

RS. SM. RS 650 R 2016. SM 650 R 2016. Manuale - Uso - Manutenzione. Manual ... Il Vostro. Concessionario SWM ha i ricambi originali, l'espe- rienza e tutte le ...

Falta: spare ‎parts

[PDF]

RS-SM 650R/2016

www.swm-motoren.nl/.../SPAREPARTS_CATALOGUE_-_RS-SM_650_MY15_Ed06-2...

RS 650R. SM 650R. Catalogo ricambi. Spare parts catalog. Catalogue pieces ... The present spare parts list enables one to order exactly the right spare parts.

Hi, i'm considering buying a te250 or te310 for my girlfriend but concerned about parts availability. I see a lot of mention of sprockets and such. But what about hard parts like case covers FI parts, etc? Will any of the SWM parts work on these older 2011ish te's?

I believe the SWM parts are more compatabe with the older red head motors ie 2010 and earlier.

This was a dealer memo sent out earlier this year regarding parts crossover, my dealer printed it out and included it with the paperwork when I got my motard...

Hi All,

New to the site , so apologies in advance if I make a mistake, but here I go anyway.

The front sprocket mentioned earlier JTF707.14 is 14 tooth and 14 spline which fits the SWM RS330r (standard front sprocket is 13 tooth), but in conjunction with the standard 50 tooth rear sprocket increases top end speed but reduces torque, which is not what I wanted (I can confirm theJTF707.14 does fit, this is from the Aprilia MXV 450).

As I am doing another chain and sprocket change, and I have been doing more scouring of the web, these are the sprockets I am going to use this time:

Front sprocket: Manufacturer AFAM, part number: 37400-13 (13 tooth)

Rear sprocket: Manufacturer JT, part number: JTA822.50

If anyone is interested I can always let you know how this one goes.