TE 310 2014 stalling issues

Syke do you maybe still have the old coil?

Update: I still haven't fixed the bike because I don't have time but the last time I rode it stopped working entirely and I had to change the spark plug. I also noticed that when hot it doesn't start with the e-starter, yet with the kickstarter it only needs one kick, sometimes maybe two. I measured the coil resistance and it looks OK, I'm suspecting it could be something with the wiring, surely something electrical. Maybe I should just order a new coil and see but I don't want to waste money. Do these simptoms indicate something else that could be wrong?

Inspect the wiring very carefully, especially around the steering stem; make sure the regulator is not cutting the wiring loom. And a small break may be hard to see. Look for small burns and melted areas too.

A few weird electrical/heat related problems seen on our bikes:

• Bad coolant temp sensor (CTS)- the white sensor might be more reliable

• Bad pick up coil- 100ohms, but it can measure good and fail at temp.

• Bad injector - 12 ohms IIRC? still can fail at temp

• Loose regulator- I don't know why this would cause weirdness.

• Bad ECU connection or pins- magnifying glass, look close.

• Bad battery (or condenser too??)- it starts, so maybe not.

• Loose connections in general. look for corrosion also.

good luck.

Did you ever figure this out? I’m having the exact same issue. Won’t e-start when hot but starts first kick.