1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc The Never Endin' (unofficial) Tiddler's Only Thread......

Discussion in '2 Stroke' started by pvduke, Aug 11, 2011.

Page 3 of 3

  1. ajaxauto Husqvarna
    Pro Class

    What would you use would have to be something strong but light weight
    ajaxauto, Aug 19, 2011
    #41

  2. ajaxauto Husqvarna
    Pro Class

    I have called about 10 of the big players here in the USA and sent 200 emails to every Husky dealer
    knowen thru husky network Even one to Rand D in Austrial
    Talked to Jay at Halls this morning and he beleives husky will have some that will work in about 6 weeks TIME will tell
    ajaxauto, Aug 19, 2011
    #42

  3. TROFFER88 Husqvarna
    Pro Class

    Location:
    Camas Wa
    The other issue is the power valve retainers . The older ones have a stepped shaft and they are discontinued as well. I dont think having some retainers machined would be a bid deal. I had to run mis-matched power valves (no big deal) in mine.

    This would be great with the correct grind (Per Walt)done as well
    TROFFER88, Aug 19, 2011
    #43

  4. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    7000 series aluminum. Might be cool to have them nikasil coated.

    Tim, yes we could do that. If there is a need we could do it.
    Motosportz, Aug 19, 2011
    #44
Page 3 of 3