1. 2 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
     TE = 2st Enduro & TC = 2st Cross

TE/TC Two new 2T models for 2017

Discussion in '2st' started by Norman Foley, May 5, 2016.

Page 4 of 4

  1. Norman Foley Husqvarna
    Pro Class

    Location:
    Trumansburg, NY... The Beautiful, Finger Lakes
    Husqvarna Motorcycle:
    82 250WR 86 250WR 93 WXE350 03 TE610
    Other Motorcycles:
    '85 Fantic 300 '12 HUSABERG TE250
    Norman Foley, May 12, 2016
    #61

  2. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    Question---- does this 2017 TX300 (all new 250/300 models) have the DDS clutch assy that came in my 2014 300? I would love to know I can throw my 800 buck Rekluse clutch into the all new powerplant clutch spot.
    robertaccio, May 13, 2016
    #62
    Kam1 and Norman Foley like this.

  3. Huskynoobee CH Sponsor ZipTy Racing

    Location:
    Castaic, CA
    Husqvarna Motorcycle:
    2011 TE449 2006 WR250
    Other Motorcycles:
    HDUltra Classic IT200 YZ250 SV650s
    Man, you've got it bad don't ya?
    Huskynoobee, May 13, 2016
    #63

  4. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    reality is much more for 2018......
    robertaccio, May 13, 2016
    #64
    ohmygewd likes this.

  5. Colo moto CH Sponsor

    Location:
    La Jara, Colorado
    Husqvarna Motorcycle:
    7602racing.com
    DDS clutch.

    http://www.cyclenews.com/2016/05/article/50176/
    Colo moto, May 15, 2016
    #65

  6. stoffle32 Husqvarna
    C Class

    Husqvarna Motorcycle:
    TE250 2014
    Other Motorcycles:
    KTM XCW 200
    Guys new KTM 2017 has new xplor Forks, similar to 4cs maybe they have finally made a good fork, and they will put that one in the husky TE models as well.
    AER for MX and Closed circuit
    stoffle32, May 17, 2016
    #66
    robertaccio likes this.

  7. LandofMotards Moderator

    Location:
    Colorado
    Husqvarna Motorcycle:
    2014 TC250
    Norman, guess this answers our question!
    Screenshot_20160517-091909.png
    LandofMotards, May 17, 2016
    #67
    woodsrider and Norman Foley like this.

  8. Colo moto CH Sponsor

    Location:
    La Jara, Colorado
    Husqvarna Motorcycle:
    7602racing.com
    Where are you seeing this xplor fork? First I have heard of it and all 2017 promo material that I have seen shows 48mm AER forks.

    Edit: Oops, figures as soon as I open my mouth I come across the 2017 exc models online. Looks like EXC models get xplor and xc models get AER.
    Colo moto, May 17, 2016
    #68

  9. ohmygewd Husqvarna
    Pro Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    13'Berg FE350, 96'WR360, 01 WR250
    Other Motorcycles:
    Aprilia RSV1000
    From the enduro21 site:
    WP Split Forks

    The all-new WP XPlor 48 upside-down fork is a split fork developed by WP in close collaboration with KTM. While it has springs on both sides, the damping action is split between the fork legs: compression on the left side, rebound on the right. The forks are easily adjusted for compression and rebound by twisting the individual dials on top of the fork tubes (30 clicks each). In addition, a longer and sealed hydro-stop guarantees better resistance against bottoming-out.
    Due to high-quality materials and a state-of-the-art production process, the new XPlor 48 forks with some 300 mm of travel combine outstanding response and damping characteristics with weight savings of around 200g over the previous generation of forks. In addition, a new, optional preload adjuster allows to quickly dial up one of three different spring preload settings without any tools.

    Me thinks they (KTM) have rebadged the 4CS into Xplor since the 4CS name is highly trashed or mistrusted :confused::eek::rolleyes:
    ohmygewd, May 17, 2016
    #69

  10. Norman Foley Husqvarna
    Pro Class

    Location:
    Trumansburg, NY... The Beautiful, Finger Lakes
    Husqvarna Motorcycle:
    82 250WR 86 250WR 93 WXE350 03 TE610
    Other Motorcycles:
    '85 Fantic 300 '12 HUSABERG TE250
    Yes indeed! TE 150 estart should be coming! :cheers:
    Norman Foley, May 17, 2016
    #70

  11. Huskynoobee CH Sponsor ZipTy Racing

    Location:
    Castaic, CA
    Husqvarna Motorcycle:
    2011 TE449 2006 WR250
    Other Motorcycles:
    HDUltra Classic IT200 YZ250 SV650s
    But they somehow addressed the lack of a bottoming system. But other than that, a very astute observation all the same.
    Huskynoobee, May 17, 2016
    #71

  12. Norman Foley Husqvarna
    Pro Class

    Location:
    Trumansburg, NY... The Beautiful, Finger Lakes
    Husqvarna Motorcycle:
    82 250WR 86 250WR 93 WXE350 03 TE610
    Other Motorcycles:
    '85 Fantic 300 '12 HUSABERG TE250
    125/150 with starter on bottom...
    [IMG]
    Norman Foley, May 18, 2016
    #72
    woodsrider, AndrewS, wallybean and 1 other person like this.

  13. lankydoug Husqvarna
    Pro Class

    Location:
    MO
    Husqvarna Motorcycle:
    WR
    Other Motorcycles:
    TM 300en
    A 150 2 stroke with linkage in a tall frame that is close to 200 lbs is the bike I've been waiting for (electric start is a bonus). The only potential down side beside the cost is the forks. I'm anxious to hear the feedback once these are out there.
    lankydoug, May 18, 2016
    #73
    Norman Foley and LandofMotards like this.

  14. cmiles Husqvarna
    AA Class

    Is there gonna b a te150 and a TX 125 cus I've seen posts online today saying TX 125 replaces te125
    cmiles, Jun 9, 2016
    #74
Page 4 of 4