1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Updated TPS/EFI Reset 449/511

Discussion in '4 Stroke' started by Tinken, Nov 14, 2012.

Page 5 of 5

  1. Huskyte449-13 Husqvarna
    AA Class

    Husqvarna Motorcycle:
    TE449 2013
    Other Motorcycles:
    Honda xr400 2014
    No More hanging Throttle and finally some old school engine braking just like the XR days. Left the second butterfly in for now bike is running fine no Flameouts.
    Thanks again DM,
    Huskyte449-13, May 31, 2017
    #81
    Dangermouse449 likes this.

  2. Dangermouse449 Husqvarna
    Pro Class

    Location:
    Sunshine Coast QLD Australia
    Husqvarna Motorcycle:
    2011 TE449
    Other Motorcycles:
    2009 CRF450R 2000 YZ125
    Good to hear
    When you're ready for some crisp throttle response, pull that second butterfly out and it'll feel like a new bike.
    Dangermouse449, Jun 3, 2017
    #82
    Huskyte449-13 and tonskiguy like this.

  3. David Edge Husqvarna

    Husqvarna Motorcycle:
    TE499
    Other Motorcycles:
    Africa Twin
    To those that know..... I am a new TE449 owner and would like advice on resetting the ECU map to standard. As bought, the bike has the race 2 map. I have downloaded the TuneECU App and bought leads to plug into the 6 pin connect. Actually the final cable, the 6 pin was a close fit but not correct. Link here please to the correct one. So, at the moment, I haven't been able to connect to the app but am I doing the right thing anyway...

    I notice a shunt as shown in the photos. What is this for? Does it need to be removed?
    The 6 pin connector on the bike has a rubber cover. A little nervous about trying to remove it in case I damage something.

    All advice welcome... Dave

    Attached Files:

    David Edge, Aug 16, 2024
    #83
Page 5 of 5