1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc Will a WR 360 engine fit in a current WR 250/300 frame?

Discussion in '2 Stroke' started by Brian Scott, May 21, 2012.

Page 2 of 3

  1. icebergstu Husqvarna
    AA Class

    Location:
    South Australia
    Husqvarna Motorcycle:
    WR300/TE610e
    Other Motorcycles:
    WR360 CT110 XR100
    I reckon he was shocked by the weight difference. Changed the whole characteristics of the bike and made it hard to ride...

    Stu
    icebergstu, Nov 28, 2015
    #21

  2. QUATTRO Husqvarna
    AA Class

    It's fits directly in the txc tc 250 xlite frame
    Only make extra mounts between the axle it fits perfectly and turn the wheel than everything fits with the chain etc.
    Also you need two stroke 125 rear shock and radiators
    QUATTRO, Dec 1, 2015
    #22

  3. QUATTRO Husqvarna
    AA Class

    FB_IMG_1448994073241.jpg
    QUATTRO, Dec 1, 2015
    #23
    marcmo0, 454x, 2premo and 7 others like this.

  4. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC

    how does the pipe come out on the 250 light, the 360 requires the frame be split for the exhaust port
    2premo, Dec 1, 2015
    #24

  5. QUATTRO Husqvarna
    AA Class

    Offcourse you have to do some litte mods but almost everything fits with husky parts two stroke
    QUATTRO, Dec 1, 2015
    #25
    454x likes this.

  6. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    shawbagga, Dec 3, 2015
    #26
    Eaglefreek likes this.

  7. Submit Husqvarna
    A Class

    Location:
    Bradford, Ontario
    Husqvarna Motorcycle:
    2012 CR125, 86 430 AUTO
    I need to make one of these for an ice racer! I have a tc frame and everything in the basement...... anyone have a 360 motor?
    Submit, Dec 3, 2015
    #27

  8. Submit Husqvarna
    A Class

    Location:
    Bradford, Ontario
    Husqvarna Motorcycle:
    2012 CR125, 86 430 AUTO
    Submit, Dec 3, 2015
    #28

  9. Submit Husqvarna
    A Class

    Location:
    Bradford, Ontario
    Husqvarna Motorcycle:
    2012 CR125, 86 430 AUTO
    Wouldn't you also need a 300 swingarm since the chain is on the other side? Also what are these spacers you are talking about?
    Submit, Dec 3, 2015
    #29

  10. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    That ain't no 2t swing arm! If the average rider(you know what I mean Quattro) could do It how hard would it have been for factory to do it?! Shaking my head...
    shawbagga, Dec 3, 2015
    #30

  11. Submit Husqvarna
    A Class

    Location:
    Bradford, Ontario
    Husqvarna Motorcycle:
    2012 CR125, 86 430 AUTO
    That swingarm has to be from a 300 or a 250 but other than that I assume it would bolt straight up. Correct me if I'm wrong but I think the linkage between a 250/300 is the same as the 125cr/wr and 250tc/txc from what I've seen on the bikes that we have.
    Submit, Dec 3, 2015
    #31

  12. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    Negative they very different
    shawbagga, Dec 6, 2015
    #32

  13. gas-can Husqvarna

    Husqvarna Motorcycle:
    1992 WXE 360
    Other Motorcycles:
    KTM, Honda, Kawasaki, Can Am
    I have a 1992 WR360 that I'm thinking of parting out, if anyone is interested in the motor. It does run but has been sitting a long time and would need to be rebuilt.
    gas-can, Dec 7, 2015
    #33

  14. icebergstu Husqvarna
    AA Class

    Location:
    South Australia
    Husqvarna Motorcycle:
    WR300/TE610e
    Other Motorcycles:
    WR360 CT110 XR100
    What part of the world are you in gas-can?
    icebergstu, Dec 8, 2015
    #34
    ohmygewd and juicypips like this.

  15. 2strokefixer Husqvarna
    AA Class

    Location:
    Lake Tahoe CA
    Husqvarna Motorcycle:
    '86 400 xc, '01 te570, '99 wr250
    Keep us posted on that motor gas can. I've got a wr250 w/ a tired motor... It'd be a fun swap
    2strokefixer, Dec 8, 2015
    #35

  16. gas-can Husqvarna

    Husqvarna Motorcycle:
    1992 WXE 360
    Other Motorcycles:
    KTM, Honda, Kawasaki, Can Am
    I am in Ocala, Florida. I would like to get $300 for it plus shipping. Have not had it apart but assume it will need a total rebuild.
    gas-can, Dec 9, 2015
    #36

  17. R-J van Hulst Husqvarna
    Pro Class

    Location:
    Cambodia
    Husqvarna Motorcycle:
    WR 125 + 40 = WB 165 and a SM165
    Other Motorcycles:
    Honda CB 400 Vtec 3
    The surroundings in the picture looks pretty much like the Netherlands.

    are you located in the Netherlands?
    Robert-Jan
    R-J van Hulst, Dec 9, 2015
    #37

  18. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    I wanna ride that bike Quattro!
    shawbagga, Dec 9, 2015
    #38

  19. QUATTRO Husqvarna
    AA Class

    Ask kapers motoren Netherlands it is his bike and I think he will help
    QUATTRO, Dec 10, 2015
    #39

  20. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    Top bloke if he's willing to bring it to Australia for me to cut laps on!:)
    shawbagga, Dec 10, 2015
    #40
    ohmygewd likes this.
Page 2 of 3