1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Wr144 What Am I Looking At?

Discussion in '2 Stroke' started by Darkside, Jan 30, 2012.

Page 2 of 2

  1. Darkside Husqvarna
    AA Class

    Location:
    SF Bay Area
    Husqvarna Motorcycle:
    none left
    Other Motorcycles:
    beta, ktm, aprilia
    Well then these look like thicker ugly galvanized sheet metal. Think they could have done a nicer piece. Especially since it's so wide open and exposed.
    Darkside, Feb 6, 2012
    #21

  2. Darkside Husqvarna
    AA Class

    Location:
    SF Bay Area
    Husqvarna Motorcycle:
    none left
    Other Motorcycles:
    beta, ktm, aprilia
    Ok, finally got it put back together. Took her apart and scubbed everything. Cleaned the spooge out of the pipe with easy-off and repacked the silencer. Replaced the linkage bearings. Sent the forks and shock to LTR. Fabbed up a bracket to hold the FBF ignition and put on shiny new graphics. She'll never again look as good as right now. Now just gotta wait to get the WB165 and I think that's it.

    [IMG] [IMG]
    Darkside, Feb 25, 2012
    #22

  3. racemx904 Husqvarna
    Pro Class

    Location:
    owenton, ky
    Husqvarna Motorcycle:
    2014 Beta 350RR & 1986 430XC
    Other Motorcycles:
    1975 Rokon and 2004 Kawasaki KX65
    When I had my 02 with every FBF gadget you could get on it....I had a rubber strap off an old husky not sure of the number....

    Bike ran a bunch better with that cdi and the FBF cylinder and head....
    racemx904, Feb 25, 2012
    #23

  4. R_Little Husqvarna
    Pro Class

    Location:
    NJ
    The 135 FBF cylinder I have on my 04 rips!!!
    R_Little, Feb 26, 2012
    #24
Page 2 of 2