250-500cc WR250 / 300 Alloy Gear Lever

I ended up just beating the crook outta mine. See where the little Husky logo is,...just about an inch down the arm from the shaft pinch clamp? There's a slight back bend in the arm right there. I took mine off, laid it on an anvil with the logo facing up, and beat that little crook straight with a ball peen hammer. That moves the tip out away from the clutch cover about another half inch or so,...but does nothing to extend the arm length of course.

That Dirt Bike Bitz shifter is a very cool looking piece, but other than the trick 'grippy tip' I don't see any functional ergonomic design improvement over the stocker,.....And I don't like the stocker.